1
General Topics / Can anyone provide a picture...
« on: April 07, 2008, 07:59:59 PM »
I need an image like this except with all the timing components removed. Thanks in advance if anyone can help.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Engine + Driveline / upper timing chain cover uneven w/ head
« on: April 06, 2008, 04:47:59 PM »
When installing the upper timing cover, mount the VC and put in a few bolts to tq specs while you have the timing case bolts finger tight. Then tighten down the bolts for the upper timing cover. This should help align the upper timing case to the top of the head.
3
Engine + Driveline / small mod with two washers :)
« on: March 31, 2008, 02:44:16 PM »
How hard would that be to come up with something like that?
4
Engine + Driveline / Question - potential problem Headgasket
« on: March 30, 2008, 10:31:06 PM »
I tried sending you the Bentley pdf but it didnt work.. If anyone can post that it'll help alot in the reinstallation process.
5
Engine + Driveline / small mod with two washers :)
« on: March 30, 2008, 10:29:47 PM »
This on a new or used tensioner piston?
6
Engine + Driveline / Question - potential problem Headgasket
« on: March 28, 2008, 12:56:47 PM »
Send me an email at tribalbot85@yahoo.com and i'll send you some information.
7
Engine + Driveline / Ticking Possibly in the Valve Train
« on: March 27, 2008, 12:03:55 AM »
Have a PN for the VW?
8
Engine + Driveline / Ticking Possibly in the Valve Train
« on: March 26, 2008, 03:10:00 PM »
What was the cost for the lifters?
9
Engine + Driveline / Proud owner of a dirty lil' 16v
« on: March 26, 2008, 03:07:43 PM »
You mean theres just an empty space in the sunroof area right now?
10
Engine + Driveline / Need advice.
« on: March 25, 2008, 01:17:28 AM »
I think I have everything now. I'm just waiting on parts and then i'll actually be doing it so something might pop up later. 
11
Engine + Driveline / Remove Crank Bolt & Busted Timing Guide
« on: March 25, 2008, 01:15:57 AM »
Thats the exact thing that happened to me. I'll be putting my motor back together shortly.
12
Engine + Driveline / Need advice.
« on: March 23, 2008, 09:00:15 PM »
Can someone who has experience with removing/installing M42 cylinder heads and the valvetrain please pm me? I'll be putting my motor back together here within the next few weeks and I have some questions!
13
Engine + Driveline / crankshaft pin
« on: March 19, 2008, 08:44:23 PM »
Look under your starter. You'll see a big hold or plug THEN look under that. You'll see a small hole. Thats the one you want.. Just FYI.
14
Engine + Driveline / 93 318is - Update to bad engine noise.
« on: March 16, 2008, 03:27:54 PM »
My cam gears are fine.. I just need to know what the Crankshaft sprocket looks like in good condition. :/
15
Engine + Driveline / 93 318is - Update to bad engine noise.
« on: March 16, 2008, 12:08:54 AM »
I pulled the pan and sound some metal pieces and LOTS of sludge around the pickup. This could explain alot of things.. I noticed aswell that the there was alot of corrosion with the gasket between the lower timing case cover and the block. I have everything apart now so I just have to deal with parts.
So this is what I was thinking:
(Cars PD 06/93)
Lower Timing case to block/head.
- Steel Gasket 11141734422 12.25
- Profile Gasket 11141247849 6.00
Head:
- Head Gasket 11121721546 41.75
- Head Bolt Set - 13.50
- Head Bolt Washers - (10) 7.50
Lower Timing Case:
- Profile Gasket - 11141247837 4.25
- Gasket Set - 11141721802 10.75
- Shaft seal - 11141439570 13.75
Upper Timing Case:
- GASKET SET - 11141721919 9.25
OIL PAN:
- Gasket 11131739592 11.00
CRANK PULLEY:
- HEX BOLT - 11211721100 7.50
- FLAT WASHER - 11231709977 7.75
TIMING SYSTEM:
- GUIDE RAIL - 11311247470 53.75
- LOWER GUIDE - 11311721419 43.50
- CHAIN TENSIONER - 11311727342 102.50
- TIMING CHAIN - 11311247160 58.00
OIL FILTER HOUSING:
- O-RING - 11421709513 5.25
- GASKET - 11421709800 1.25
WATER PUMP:
- O-RING - 11511714519 8.59
INTAKE/EXHAUST MANIFOLDS:
- Intake manifold gasket - 11-61-1-734-684 6.50
- Exhaust manifold gasket - 11-62-1-728-983 12.50(2)
--------------------------
Roughly $450 bucks for above mentioned parts. Prices were from Pelicanparts.. I hate this car.
Also does anyone have a few pictures of what a good condition crank sprocket looks like? I think mines fine.
Otherwise i'll have to get:
- CRANK SPROCKET - 09/1993 11211247338 51.00pp
So this is what I was thinking:
(Cars PD 06/93)
Lower Timing case to block/head.
- Steel Gasket 11141734422 12.25
- Profile Gasket 11141247849 6.00
Head:
- Head Gasket 11121721546 41.75
- Head Bolt Set - 13.50
- Head Bolt Washers - (10) 7.50
Lower Timing Case:
- Profile Gasket - 11141247837 4.25
- Gasket Set - 11141721802 10.75
- Shaft seal - 11141439570 13.75
Upper Timing Case:
- GASKET SET - 11141721919 9.25
OIL PAN:
- Gasket 11131739592 11.00
CRANK PULLEY:
- HEX BOLT - 11211721100 7.50
- FLAT WASHER - 11231709977 7.75
TIMING SYSTEM:
- GUIDE RAIL - 11311247470 53.75
- LOWER GUIDE - 11311721419 43.50
- CHAIN TENSIONER - 11311727342 102.50
- TIMING CHAIN - 11311247160 58.00
OIL FILTER HOUSING:
- O-RING - 11421709513 5.25
- GASKET - 11421709800 1.25
WATER PUMP:
- O-RING - 11511714519 8.59
INTAKE/EXHAUST MANIFOLDS:
- Intake manifold gasket - 11-61-1-734-684 6.50
- Exhaust manifold gasket - 11-62-1-728-983 12.50(2)
--------------------------
Roughly $450 bucks for above mentioned parts. Prices were from Pelicanparts.. I hate this car.
Also does anyone have a few pictures of what a good condition crank sprocket looks like? I think mines fine.
Otherwise i'll have to get:
- CRANK SPROCKET - 09/1993 11211247338 51.00pp