Author Topic: Single Row Chain (Read 13376 times)

JP 91iS · « **Reply #30 on:** October 23, 2008, 01:44:54 PM »

Quote from: marko;59326

I just ordered the single timing chain conversion from MM.
its $250 - but I did send them my old chain + cam sprockets + crank sprocket as cores - so I'm hoping to get a discount.

Nice, thanks. $250 isn't that much more than it would cost to buy stock replacements for the chain and sprockets.

marko · « **Reply #31 on:** October 24, 2008, 07:15:57 AM »

yes, correct, it is not so bad... $250 is a long drinking weekend, sometimes

Quote from: JP 91iS;59340

Nice, thanks. $250 isn't that much more than it would cost to buy stock replacements for the chain and sprockets.

JP 91iS · « **Reply #32 on:** October 30, 2008, 07:23:02 AM »

Here is an email I got back from MM, just a confirmation of what marko told us.

Quote

Hi JP - gosh we appreciate your email inquiry but sure do regret this delay.
Jim looked your message over and said that we could do this conversion kit for you
BUT - you'd have to send us your sprocket. Price would $250.
Let us know if you have other quesions.

Sincerely, Mary Rowe

marko · « **Reply #33 on:** October 31, 2008, 05:43:19 AM »

here is complete catalog of goodies from metric - as well as their price list on the bottom...
its soooo hard to keep your money in your pocket - when there is so much good stuff there.. I'm into them for about 4K already.

http://www.metricmechanic.com/pdfs/metric-mechanic-m42-and-m44-engine-booklet.pdf

odbod · « **Reply #34 on:** February 03, 2009, 08:10:10 AM »

I've done a bit more digging an this subject, the BMW chain is a european duplex standard chain spec is 06B-2, 06B=3/8" pitch, -2=duplex chain. Based on this being a standard chain then you can go to most engineering suppliers and order a simplex (single row) version of the same thing. The IWIS catalogues suggests that it is a 120link chain, but I need to count this to be sure. I called a local distributor and the most expensive, durable and strongest chain on the market today is a Renold Synergy chain, which would outlast any OEM chain, a Synergy Simplex 06B-1 Chain in the UK comes in at �42.53+VAT @ 15% which is expensive, but not a huge amount, and I'm sure it could be found cheaper... This is made and riveted to length, not using a removable link (although emold claim their removable link is ok) You should be able to get one made locally in the US too.

http://www.renold.com/nmsruntime/saveasdialog.asp?lID=426&sID=942

e30guydownunder · « **Reply #35 on:** February 08, 2009, 05:17:01 PM »

wow thanks for the great info Odbod. Will have to see what i can source locally, atleast now i know what to order

marko · « **Reply #36 on:** February 09, 2009, 08:11:51 AM »

one thing to keep in mind (after speaking with MM) is that the chain is not going to cause a problem - i.e. it will not break, however, MM told me that once my motor is installed with the STC conversion, I WILL have to keep a keen eye on the chain tensioner (checking it at least every 6 months) - making sure that the tension is optimal at all times.
appeareantly the chain will last fine providing there is no slack...

I'm getting my MM motor end of this month, & will let you guys know how it works out.

JP 91iS · « **Reply #37 on:** February 09, 2009, 02:52:52 PM »

Quote from: marko;66174

I'm getting my MM motor end of this month, & will let you guys knwo how it works out.

OT: Marko: Maybe you covered this elsewhere, but what are you going to do with your DASC?

marko · « **Reply #38 on:** February 10, 2009, 06:56:47 AM »

keeping it... DASC is going on the MM motor.

somewhat like in the thread below, but with MUCH less boost

http://www.318ti.org/forum/showthread.php?t=24635

Quote from: JP 91iS;66189

OT: Marko: Maybe you covered this elsewhere, but what are you going to do with your DASC?

JP 91iS · « **Reply #39 on:** February 10, 2009, 07:22:47 AM »

Quote from: marko;66249

keeping it... DASC is going on the MM motor.

somewhat like in the thread below, but with MUCH less boost:D

nice! I'm jealous - but you should consider putting the setup into an E30 :cool:.

odbod · « **Reply #40 on:** February 10, 2009, 07:32:43 AM »

there's a DASC kit on sale in te UK for �600 at the moment on http://www.pistonheads.com/sales/886244.htm

I've not got enough money to buy sadly, too much spent on a 2.0l build

marko · « **Reply #41 on:** February 10, 2009, 07:59:16 AM »

get it man... that is a steal! I paid 3.3K for mine...

it will enhance any other additional work on your motor... not too much boost & so you do not need any crazy mods like for a turbo (i.e. designed to work with stock internals - stock ecu, etc).

Quote from: odbod;66252

there's a DASC kit on sale in te UK for �600 at the moment on http://www.pistonheads.com/sales/886244.htm

I've not got enough money to buy sadly, too much spent on a 2.0l build

marko · « **Reply #42 on:** February 10, 2009, 08:00:16 AM »

yes, I should - you are right.

I absolutelly love E30s.. they have a special place in my heart, just like the 87-92 Gti 16Vs.

Quote from: JP 91iS;66251

nice! I'm jealous - but you should consider putting the setup into an E30 :cool:.

max123 · « **Reply #43 on:** February 16, 2009, 07:10:24 PM »

The early mercedes 2.3-16v motors used a single row timing chain, but they upgraded to the dual in the later model because of durability issues. I don't see a snapped timing chain thread in this forum, so maybe BMW got it right from the factory

marko · « **Reply #44 on:** February 20, 2009, 08:47:41 AM »

as promised - here are the pix of my upcoming MM motor with a single timing chain conversion... the guys from Metric have been kind enough to send me some pix from the build, to salivate over.

more pix of the entire thing here:
http://www.318ti.org/forum/showthread.php?t=25646