Author Topic: gonna paint my valve cover (Read 8255 times)

91318isfoundation · « **on:** June 14, 2007, 10:30:54 AM »

long as my enigine is all in pieces i was gonna paint some of it and im starting with the valve cover and i want sum type of color theme im most def. painting it black but im not sure what to paint the lines on it i dont want to do the traditional grey so i was gonna go with either Red (my dad said it will look like a saab) or like an m3 blue. any input ? what do u guys think

P.S. spelling and punctuation can go screw

m44power · « **Reply #1 on:** June 14, 2007, 11:36:31 AM »

some ideas the black red yellow is mine you can do this with m3 colors or you can paint it black like the small black cover on honda's S2000

m44power · « **Reply #2 on:** June 14, 2007, 11:38:06 AM »

thats mine

n2motorsports · « **Reply #3 on:** June 14, 2007, 12:12:38 PM »

what color is your car and engine bay. if white, i like red. black then a darker color, like flat black to keep the stealthness.

91318isfoundation · « **Reply #4 on:** June 14, 2007, 02:02:33 PM »

i like i was thinking of the m power colors also as of right now i just have to go over my cover with a mild degreaser then im gonna prime it and my car is black or diamond black or sumthin like that but its all faded and Shite

nuvolarossa · « **Reply #5 on:** June 14, 2007, 03:03:26 PM »

Quote from: m44power;27720

thats mine

Have you some pics of it fitted?:rolleyes:

m44power · « **Reply #6 on:** June 14, 2007, 03:42:59 PM »

Quote from: nuvolarossa;27727

Have you some pics of it fitted?:rolleyes:

there you go i have chrome bolts too and i just make a chrome cover for my COP setup im gone post some pics soon and i keep looking for an chrome m3 oil cup

91318isfoundation · « **Reply #7 on:** June 14, 2007, 06:52:45 PM »

nice i think i may have a go at the COP moD

Wizard · « **Reply #8 on:** June 14, 2007, 07:26:04 PM »

I am in the process of redoing my VC and intakes...VC installed--intake (upper and lower in the works). Was thinking of powder coating them, but I am to damn cheap...lol
Steps I took.

1. Clean the piss out of the parts. I used "Aircraft Remover" to strip the parts.
2. Primed with "Adhesion Promoter"
3. Painted with Dupli-color Textured Metallic
4. Sanded "stripes and logo" to bare metal
5. Clear coated them

The VC is a little dirty right now....Don't punish me....lol

91318isfoundation · « **Reply #9 on:** June 14, 2007, 09:38:19 PM »

nice your intake manifold looks a hell of a lot cleaner than mine does. so what did you use beside the aircraft remover cause ive been going at my stuff with a wire brush on a air tool works good but not so much in the crevices

m44power · « **Reply #10 on:** June 15, 2007, 02:36:27 AM »

i like wizard's too that i mean then i say like honda S2000 his intake rocks

Wizard · « **Reply #11 on:** June 19, 2007, 05:38:48 AM »

Quote from: 91318isfoundation;27747

so what did you use beside the aircraft remover cause ive been going at my stuff with a wire brush on a air tool works good but not so much in the crevices

Just used the AR and a pressure washer. No scrubbing/sanding required. Just don't get that AR stuff on your skin....Will burn like a MoFo....lol

m44power · « **Reply #12 on:** June 19, 2007, 01:28:43 PM »

then i paint my cover i sandblasting it with glass

it looked like a new one (maybe better)!!!!

91318isfoundation · « **Reply #13 on:** June 19, 2007, 10:48:15 PM »

Quote

Just don't get that AR stuff on your skin....Will burn like a MoFo....lol

im guesssing u learned that from experience eh? lol

nuvolarossa · « **Reply #14 on:** June 20, 2007, 06:47:00 AM »

who is thinking of make a thing like this:

I like it too much, but I'm search other colours too, but the ///M stripes are a MUST!:D
Do you like it?