Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - rob_e30

Pages: [1] 2 3 ... 35
1
For Sale / Re: The Ultimate COP FS Thread
« on: February 16, 2021, 06:35:13 AM »
Are these still available?

2
For Sale / Re: The Ultimate COP FS Thread
« on: August 31, 2015, 01:00:13 PM »
Can the plate be run upside down?  I will be modifying my coil tofit that way if so. I like the wires run along the bottom.

The plate should mount fine, but I believe you'll have a problem with the #1 coil mounting to the plate as that coil has to be customized in order to fit between the cams.

3
For Sale / Re: The Ultimate COP FS Thread
« on: July 09, 2015, 05:04:33 PM »
Thank you all for your continued support!  Just an FYI... We will be closed and on vacation for two weeks.  Any orders placed will be fulfilled in late July/early August.

4
For Sale / Re: The Ultimate COP FS Thread
« on: April 07, 2015, 04:58:18 PM »
Wow, I can't believe how well these still sell!

5 kits in-hand and ready to ship!

5
For Sale / Re: The Ultimate COP FS Thread
« on: November 25, 2014, 10:52:47 AM »
Update!  All full kits ordered by Saturday 11/29 will have their name added to our car for the NASA 25 Hours of Thunderhill!  Here is your chance to sponsor a BMW race car and get a COP kit at the same time.

https://www.indiegogo.com/projects/conquer-the-25-hours-of-thunderhill-and-help-vets


6
hmm...
http://igg.me/at/technikhq/x/9121432

Thanks, try this one please!

7
General Topics / Help M42 fans beat Mazda at the 25 Hours of Thunderhill
« on: November 17, 2014, 10:12:14 AM »
We are long time BMW fans and still own/race an E30 that went through many variations. We are also racing an E46 in the new class Spec E46 and we need your help. Please help us raise money to get to the 25 Hours of Thunderhill! For as little as $10 we'll make you a sponsor, with your name on the car.

Many of you should know me because of our COP kit that we started reselling to support our turbo M42.

There are 11 cars in our class, but it's boiling down to BMW vs. Mazda diesel.  We're currently #2 on the season in the West vs. Mazda so we want to bring home the win!

Check out our campaign here: http://igg.me/at/technikhq/x/9121432

8
For Sale / Re: The Ultimate COP FS Thread
« on: May 22, 2013, 12:40:49 AM »
Check the website for a limited time sale.  We're raising money to run our first enduro!

9
Swaps, Turbos, Buildups / Re: M42 Turbo Oil Return Line
« on: May 08, 2013, 07:49:35 AM »
We installed the inlet farther back in the block in order to allow the oil to cool against the pan as it ran down to the sump.  It was also above the sump level.

10
Swaps, Turbos, Buildups / Re: M42 Turbo Oil Return Line
« on: April 26, 2013, 11:58:05 PM »
Here is where we did it...  Don't forget to factor in your motor mount and exhaust locations.

11
For Sale / Re: The Ultimate COP FS Thread
« on: April 22, 2013, 10:47:13 AM »
Only 1 M44 PnP Harness left

12
For Sale / Re: E30 4 Lug Wilwood BBK
« on: April 19, 2013, 11:06:28 AM »
Sold, but thanks for looking!

13
For Sale / E30 4 Lug Wilwood BBK
« on: April 16, 2013, 04:59:09 PM »
We've decided to upgrade both the front and rear kits on the race car, so this BBK from UUC is now available.  Below is a pic when we installed it.  This kit is no longer available and is not their smaller, direct bolt on kit.  This was their larger race kit for 17" wheels.

All the features you want:
Floating rotors
Quick release pads
4 piston Dynalite billet calipers
Works with stock rear brakes
Works with 17" wheels, does not work with 15" wheels
Works with stock brake lines
Includes partially worn Hawk DTC60 front AND rear pads
Includes brackets, calipers, rotors, pads, hats.

$750 plus shipping.  Once I pull them off, I can confirm the weight and shipping costs.

14
For Sale / Re: The Ultimate COP FS Thread
« on: April 11, 2013, 02:16:02 PM »
We have a limited number (2) of the M44 PnP kit, as well as more M42 kits in stock.

15
For Sale / Ignition Wires for COP Kit
« on: February 18, 2013, 04:46:47 PM »
Here is the promised COP Plug Diagram for those of you with the later model M42 or any M44 engines.

Pages: [1] 2 3 ... 35