Author Topic: COP Brackets: Your Preferences? (Read 81263 times)

e30s4evr · « **Reply #105 on:** July 28, 2007, 11:37:32 PM »

me 2.

rfritz · « **Reply #106 on:** July 29, 2007, 02:35:48 PM »

I'll take one too.

gearheadE30 · « **Reply #107 on:** July 29, 2007, 03:35:14 PM »

Me too.

bmwman91 · « **Reply #108 on:** July 29, 2007, 07:20:27 PM »

Well shit, looks like I have some work to do! I will not be able to do anything this week as I am taking time off work to climb in SoCal, but the week after I might be able to work some magic. Thanks guys!

jpod999 · « **Reply #109 on:** July 30, 2007, 12:27:32 AM »

Can someone remind me of the advantages of a COP system?

gearheadE30 · « **Reply #110 on:** July 30, 2007, 10:57:17 AM »

Quote

Can someone remind me of the advantages of a COP system?

Do I smell sarcasm?

When you are running an 4 original coils and they need to be replaced anyway plus it is a little smoother and maybe a bit better throttle response. True, it isn't much, but it is cheaper than buying four new M42 coils. If you know of any place to get them on the cheap with less than 50k, let me know

.

D. Clay · « **Reply #111 on:** July 30, 2007, 11:48:13 AM »

Quote from: jpod999;30693

Can someone remind me of the advantages of a COP system?

and they look so cool....
and there's more room for a turbo...
and they look so cool...
and they're cheaper than a set of wires and coils for M42 with 150,000 plus miles that is still making it on the original tired stuff.

Donkeyshins · « **Reply #112 on:** July 30, 2007, 02:52:29 PM »

Quote from: bmwman91;30650

Oh and this includes mounting hardware and instructions.

Lemmie check w/ the wife. We just got audited and cash is a bit tight...

-D

bmwman91 · « **Reply #113 on:** July 30, 2007, 02:57:31 PM »

Quote from: Donkeyshins;30731

Lemmie check w/ the wife. We just got audited and cash is a bit tight...

-D

As in this being a $130 purchase? You get the COP plate and she gets new shoes? jk

jpod999 · « **Reply #114 on:** July 30, 2007, 05:22:46 PM »

Quote from: gearheadE30;30718

Do I smell sarcasm? When you are running an 4 original coils and they need to be replaced anyway plus it is a little smoother and maybe a bit better throttle response. True, it isn't much, but it is cheaper than buying four new M42 coils. If you know of any place to get them on the cheap with less than 50k, let me know .

Lol no sarcasm. bmwman...put me down for one too.

bmwman91 · « **Reply #115 on:** July 30, 2007, 07:31:47 PM »

Good grief, I will have my work cut out for me after my vacation!

So, thus far I have:

[See post 127]

nomad · « **Reply #116 on:** August 08, 2007, 07:45:56 PM »

Would a sheet of delrin be cheaper than aluminum? How about a heat resistant ABS plastic? Small washers and nuts can fix the bolting issue. May be much cheaper to produce. I came across a material called "diebond" that is two peices of aluminum bonded to PVC core. Total thickness is 3/16" or so. Pretty light stuff. I'm going to see if I can get some of it and put it in the engine bay to test heat resistance.

bmwman91 · « **Reply #117 on:** August 09, 2007, 12:00:06 PM »

Delrin would probably be a lot more expensive than plain old aluminum bar. ABS is relatively pricey as well. It might seem counterintuitive, but polymer products like that are much more costly in a low-volume application like this. They can be more challenging to machine too...harder to clamp straight and cut.

ScreamerBeemer · « **Reply #118 on:** August 09, 2007, 10:38:55 PM »

If you can swing 7, im in. I still have the original coils and wires after I saw how much the wires were.

bmwman91 · « **Reply #119 on:** August 10, 2007, 09:59:52 AM »

OK, so the list in post 116 is now final. I will hit the metal dealer either this afternoon at lunch or tomorrow morning. Unless the world is consumed in flames or something big like that, I will be making the plates on Sunday/Monday. From there we can work out payment and shipping. Everyone is in the US right? If you are in another country, it will be more than $65 shipped. Thanks.

Author Topic: COP Brackets: Your Preferences? (Read 81263 times)

e30s4evr