Author Topic: Parting 2x 318is Motors (Read 8353 times)

sic///M · « **on:** August 27, 2009, 07:08:18 PM »

Everything available from DMEs to pistons and accessories. let me know what you need and make an offer

2 cylinder heads are available for $325 each. straight and in drop in shape with camshafts and sprockets attached

set of 6 or 8 pistons for the m20 guys $100 for all 8 or $50 for 4, thats including con-rods

prices are in USD

Located in Toronto, ON

thunder39 · « **Reply #1 on:** August 30, 2009, 09:32:34 PM »

good working icv? Also may be interested in ecu? Or do you just have the blocks.

Birdman16 · « **Reply #2 on:** August 31, 2009, 02:07:16 PM »

Extra front and rear timing cases needed. Also a set of upper and lower oilpans... How much would you like for them if they are still available?

sic///M · « **Reply #3 on:** September 07, 2009, 07:20:09 PM »

icv and ecu are available, timing cases and oilpans as well, Birdman16 if you'd like to, send me an offer and specify what you need, ICV and ECU i can do for $50 + shipping

e30sleeper · « **Reply #4 on:** December 11, 2009, 05:39:18 PM »

hi ill take the 2 oil pans and front timing cover, and oil pump

carguy101 · « **Reply #5 on:** December 15, 2009, 09:50:59 PM »

how are the guides and chain rails?

richbarn2 · « **Reply #6 on:** December 16, 2009, 01:01:00 AM »

Do you have a serviceable AFM for the M42? richwrench@gmail.com

Thanks, Rich

dvmotorsports · « **Reply #7 on:** December 21, 2009, 06:52:12 PM »

how much for a 175 DME and one coil pack to 96701?

Chalino · « **Reply #8 on:** December 22, 2009, 12:31:26 PM »

I need a dipstick; pretty much the tube and measuring wand and any brackets hlolding it to the block.

fiftytakedowns · « **Reply #9 on:** December 22, 2009, 01:38:34 PM »

Crank position sensor to 94903?

clutchkick · « **Reply #10 on:** December 23, 2009, 07:45:31 PM »

full intake manifold and valve cover to 91901?

ScHpAnKy · « **Reply #11 on:** December 26, 2009, 04:05:17 PM »

nvm, and good luck

ThaiRacer · « **Reply #12 on:** December 26, 2009, 08:08:39 PM »

Hey do u have the valve cover bolts? if so how much shipped to 33534

stangimon · « **Reply #13 on:** December 27, 2009, 09:41:03 PM »

Is that a m42 head. I need one and the side chain guides and crank sproket. Also the waterpump if its ina real good shape.
Thanks,
Dickie

enildeR · « **Reply #14 on:** December 28, 2009, 12:33:00 PM »

do you have a block, crank and a good oil pump?