Author Topic: Custom Intake Plenum (Read 32246 times)

rob_e30 · « **on:** March 06, 2009, 12:20:24 AM »

I've been working on a design for a custom intake plenum for the race car. It will use the stock runners from the bottom end of the original plenum. Here are the pics so far...

I hope to have final pics this weekend.

bearsbmw · « **Reply #1 on:** March 06, 2009, 12:24:30 AM »

nice!! I hope the e36 m42 will be next

rob_e30 · « **Reply #2 on:** March 06, 2009, 12:31:20 AM »

It should work for either.

Danny707 · « **Reply #3 on:** March 06, 2009, 12:34:00 AM »

Hawt.

Boyracer · « **Reply #4 on:** March 06, 2009, 02:16:40 AM »

I take that is for turbo or supercharger use? Because runners that short would have tuned frequency over 10 000 RPM in NA application and huge flat spot everywhere under it

strypt · « **Reply #5 on:** March 06, 2009, 03:02:19 AM »

Will not work for E36 if using its original engine wiring harness

bearsbmw · « **Reply #6 on:** March 06, 2009, 07:28:58 AM »

Quote from: strypt;67793

Will not work for E36 if using its original engine wiring harness

true!!

rob_e30 · « **Reply #7 on:** March 06, 2009, 07:52:49 AM »

Yes, it is designed for an FI application. What about the stock E36 wiring harness keeps you from using this? If someone is interested in one of these, we can customize it with specific fittings (MAP, MAT, brake booster), brackets, and throttle body mounting.

Appletree IS supercharged · « **Reply #8 on:** March 08, 2009, 01:01:16 AM »

Rob that looks sweet as, what throttle are you looking at using? are you putting a air inlet temp boss in ikt for your ecu? were abouts?

Tor Arne Kaasen · « **Reply #9 on:** March 08, 2009, 06:05:13 AM »

Wan`t one pleas, can you make me one, and how much.:confused:
nead to be shipt to norway. can pay in advance. bank wier tranfere etc.

e21m44 · « **Reply #10 on:** March 08, 2009, 09:18:56 AM »

Is it for n/a or turbo aplication?

Cristian G in Oz · « **Reply #11 on:** March 08, 2009, 10:55:31 PM »

Quote from: rob_e30;67796

Yes, it is designed for an FI application.

Robs Car is Turboed.

strypt · « **Reply #12 on:** March 09, 2009, 02:55:20 AM »

E36 uses a different design on the intake runners and the plastic box for the harness. On E30 the box sits completely underneath the runners but on E36 it sits in between #2 and #3 intake runner.

rob_e30 · « **Reply #13 on:** March 09, 2009, 12:32:38 PM »

Quote from: Tor Arne Kaasen;67907

Wan`t one pleas, can you make me one, and how much.:confused:
nead to be shipt to norway. can pay in advance. bank wier tranfere etc.

I can get additional plenums made and am willing to make them available. PM me for details.

Rob.

rob_e30 · « **Reply #14 on:** March 09, 2009, 09:44:20 PM »

Here are some more pics. A bit more work to get the proper throttle cable bracket, etc. but you can see how it's coming together. It needs to be cleaned and smoothed but all things considered I'm very happy with the results so far.

We'll be selling these for $800 plus shipping and a $100 core charge for the intake runners.