Author Topic: Oil feed for turbo (Read 3286 times)

walts03 · « **on:** March 05, 2009, 04:06:32 PM »

Hi i am looking at putting a turbo on my E30 1989 318is. I have read some of the other threads about where to get the oil feed from. but i managed to get the bolt out that is just bellow the oil filter housing could i use this hole for the oil feed for my turbo?

Danny707 · « **Reply #1 on:** March 05, 2009, 04:09:26 PM »

I used that, but I guess your not supposed to.

rob_e30 · « **Reply #2 on:** March 05, 2009, 10:45:58 PM »

I'm sure it will work for that. Make sure you put a pressure reducer on the oil supply as that is a high pressure fitting. In fact, we have a part that allows you to use that fitting. It screws in there and is tapped with a 3/8" NPT female thread. I'll try and post a pic in or you can PM me your address and I'll send one over.

ludiagsm · « **Reply #3 on:** March 06, 2009, 10:55:20 AM »

I did't tried that but there has dyrti oil ,you must take oil after the oil filter.