another budget turbo build...bottom mount

[longms]

as for the flywheel/clutch kits; we send them completely plug and play for about $550.  it can be hard to come up with cores at times so very subject to availability.

Might be contacting you soon about this.

Thanks for the build thread. Too bad you had to get rid of it.

[TokyoEnigma]

as for the flywheel/clutch kits; we send them completely plug and play for about $550.  it can be hard to come up with cores at times so very subject to availability.

I'm also interested in this. Definitely looking to change that clutch soon. Might as well combo the flywheel. :cool:

[SimplyDope]

I'll be calling the shop tomorrow about the single-mass kit as well

[SimplyDope]

Just called and was quoted $600 for anyone else interested.

[BlackBMWs]

Yup, call last week and was quoted $600.  Put my name in for one on the waiting list.   :cool:

[SimplyDope]

Sweet. Calling DTM on Monday to confirm an order. I'll definitely keep everyone updated.

[318kid]

I want this turbo manifold.

[Rudy sj]

I have just made a similar setup for my son, but we are having problems with the crank case breathing. The catch tank is filling up pretty fast when pushing hard on the track. Normal hard driving it works fine. How is this project handle the crank case breathing?

This is our project (in Norwegian, but the pics tels a lot).
http://bimmers.no/forum/viewtopic.php?f=11&t=223632&hilit=robins

[ChrisPino]

Here is my Turbo built E30 318is Turbo 313Whp.

https://plus.google.com/+ChrisPhares/photos

Check out my Youtube Channel for some videos.

https://www.youtube.com/channel/UCLEu7uRERoZOnpMyy0x4enA

Cheers.

[tglaze]

I have just made a similar setup for my son, but we are having problems with the crank case breathing. The catch tank is filling up pretty fast when pushing hard on the track. Normal hard driving it works fine. How is this project handle the crank case breathing?

Its got stock pistons and not much boost so its not a problem.  you will likely need to add an extra breather port on the valve cover and make sure all breathers are vented to atmosphere and no boost pressure is being fed into crankcase.

This is our project (in Norwegian, but the pics tels a lot).
http://bimmers.no/forum/viewtopic.php?f=11&t=223632&hilit=robins