Author Topic: Ultimate budget build. (Read 82752 times)

Danny707 · « **Reply #135 on:** January 19, 2009, 03:47:17 AM »

Quote from: nomad;64953

So I'm trying to follow all this and a lot of it is new to me. I'm interested in budget building as well and am willing to take some time and collect the parts I'll need.

Any way of putting together a "shopping list" of essential parts and the cars they come from etc? Mitsu or Volvo turbo or Isuzu intercooler etc.

I see you are testing various parts so I assume things can always be improved down the line. Great info so far, I'm also looking at the thread on the bottom mount turbo option.

And I can't tell how close or far you are from your goals:
"7 psi under a grand.
~175whp without pulling the motor.
Done in a weekend."

Well let me think.

A list:
Tc05-12a from a Mitsu Starion(Any Volvo 740 turbo will work as well as any small turbo)
M50 manifold fipped and cut with welded on up-pipe.
Flex pipe for down pipe
Down pipe w/ flanges from a Volvo 740 turbo
Magnaflow Muffler
Cartech/Begi RRFPR/FMU
Universal Intercooler piping (Ebay)
GOOD hose clamps (Home depot)
Intercooler (PNP/Craigslist/Ebay)
Various lines and fittings for oil and coolant and vacuum (Kragen/Ebay/Summit Racing)
300cc injectors (From a turbo 740, green tops)
Boost Gauge
A/F gauge
Diverter/Blow off valve (Ebay)
Grinding wheels
Welding wire
Lots of sweat and blood
Really knowledgeable friends
A little extra money because things WILL go wrong and you WILL be making late night trips to Kragen/Autozone.
PATIENCE

As for the goals, we did it in 3 days, give or take.
I'm afraid to add up the total because it may be a little over a grand esp. with the last minute things I needed, but I know its close.
And the 175whp... That'll have to wait till I get it dyno'd

nomad · « **Reply #136 on:** January 19, 2009, 12:13:49 PM »

I really do appreciate it. I had some of those things in mind as I've read through things.
I'm going to see how many Volvo 740 turbos I can rape for parts as it looks I may just need one or two good donors in the PNP.

Volvo turbos have internal WG too correct? So all "management" is done with RRFPR and stock computer? We've got no knock sensors so I guess we are just relying on the forged bottom end to take the stress.

So welding is necessary right? Only for the manifold? I need to get some more friends...

bearsbmw · « **Reply #137 on:** January 19, 2009, 12:41:12 PM »

Quote from: nomad;64971

I really do appreciate it. I had some of those things in mind as I've read through things.
I'm going to see how many Volvo 740 turbos I can rape for parts as it looks I may just need one or two good donors in the PNP.

Volvo turbos have internal WG too correct? So all "management" is done with RRFPR and stock computer? We've got no knock sensors so I guess we are just relying on the forged bottom end to take the stress.

So welding is necessary right? Only for the manifold? I need to get some more friends...

I dont think your m42 has knock sensors

Danny707 · « **Reply #138 on:** January 19, 2009, 01:11:31 PM »

Quote from: nomad;64971

I really do appreciate it. I had some of those things in mind as I've read through things.
I'm going to see how many Volvo 740 turbos I can rape for parts as it looks I may just need one or two good donors in the PNP.

Yeah PnP always has tons of donors.

Quote

Volvo turbos have internal WG too correct? So all "management" is done with RRFPR and stock computer? We've got no knock sensors so I guess we are just relying on the forged bottom end to take the stress.

Thats correct, as long as you stay a little rich and don't over do the boost you won't knock.

I accidently hit 10psi when I was fucking around with some settings and still didn't knock.

Quote

So welding is necessary right? Only for the manifold? I need to get some more friends...

You could get the welding done at a welding shop for cheap, it won't take them long.

nomad · « **Reply #139 on:** January 19, 2009, 02:33:46 PM »

Quote from: nomad;64971

We've got no knock sensors

Quote from: bearsbmw;64972

I dont think your m42 has knock sensors

Roger that

bearsbmw · « **Reply #140 on:** January 19, 2009, 03:01:03 PM »

Quote from: nomad;64981

Roger that

My bad!

Danny707 · « **Reply #141 on:** January 20, 2009, 12:23:41 AM »

LOL 318

bearsbmw · « **Reply #142 on:** January 21, 2009, 11:51:53 AM »

how is it running now?

AcSchnitzer318is · « **Reply #143 on:** January 21, 2009, 09:59:08 PM »

Danny, you just made me push back getting my wheels and push up installing the turbo... shame on you.

Thanks for that shopping list as well.

Danny707 · « **Reply #144 on:** January 21, 2009, 10:54:50 PM »

For sure!

Danny707 · « **Reply #145 on:** January 22, 2009, 04:37:05 PM »

I took hella fucking pictures.

Oil return from turbo

Down

And to the pan

Oil feed

Intercooler shit

RRFPR, not yet mounted.

Exhaust shit

Needs hangers.

ludiagsm · « **Reply #146 on:** January 22, 2009, 04:58:42 PM »

Hey man your oil feed is wrong ,dont take oil from that place because that oil is dirty you teke it just before oil filter.You must take clean oil after the oil filter,take it from the oil lamp sender place, use T fitting and everything will be fine

Boosted E30 · « **Reply #147 on:** January 22, 2009, 06:53:10 PM »

ya just make a "T" off of the oil pressure switch

bearsbmw · « **Reply #148 on:** January 22, 2009, 07:02:34 PM »

lol unfilterd oil will not hurt your turbo at all... check and remove your hose and blow it out with compressor once a year to keep it free of crude and build up ... running a filterd setup with still produce oil sludge build up over time

naika · « **Reply #149 on:** January 24, 2009, 03:53:38 PM »

Great pics man, thanks for getting all that info through to us. I certainly appreciate it!