Author Topic: hartge 2.1? (Read 6324 times)

///m42 sport · « **on:** November 10, 2008, 10:07:32 PM »

Hey anyone have info on this engine? Never knew Hartge developed the m42

///m42 sport · « **Reply #1 on:** November 10, 2008, 11:03:16 PM »

oops, just saw the other thread.

strad · « **Reply #2 on:** November 11, 2008, 12:08:11 AM »

That is a beautiful thing.

marko · « **Reply #3 on:** November 11, 2008, 09:54:50 AM »

this guy has an M44...

http://www.vitessetuning.com/images/project/page1.htm

cecotto · « **Reply #4 on:** November 12, 2008, 09:19:43 AM »

I've just scanned this for you.

marko · « **Reply #5 on:** November 13, 2008, 07:29:05 AM »

Hartge is probably a lot of money...

if you want a 2.1L - just call metric mechanic & purchase their internals from their M42 Rally motor.

roundel318 · « **Reply #6 on:** November 13, 2008, 09:04:40 AM »

I don't think the MM kids sell ALL of the components (at least pistons they state in FAQ's) seperate, although they do seem to sell a variety of components.

marko · « **Reply #7 on:** November 13, 2008, 10:12:31 AM »

they'll sell you anything you want & they'll help you figure out what exactly you need in order to achieve what you want...

I currently have a runing tab with them for my ongoing project - & so far I got the FI piston / rod kit (10:1 compression with 2.0L) + M44 Rally cylinder head + 258 degree intake cam + single timing chain conversion + 360 degree main bearing oiling system.

they'll do custom set ups as well, so much so, that they'll actually design a set up from scratch for you according to which parameters you are looking for... I.E. desired dispalcement, compression, cam & crank combos.

they even have euro diesel M47 cranks.

off course, unless you'll have them build you a complete motor (9K) - you may have to find a shop to open up the cyl walls for (all) metric oversized pistons.

call them & ask for teddy.... Metric FTW!

good luck.

Quote from: roundel318;60601

I don't think the MM kids sell ALL of the components (at least pistons they state in FAQ's) seperate, although they do seem to sell a variety of components.

Hodge · « **Reply #8 on:** November 13, 2008, 10:48:52 AM »

MM is awsome, can't go wrong with them!

roundel318 · « **Reply #9 on:** November 13, 2008, 11:20:07 AM »

Thats awesome!
I have been in correspondence with Teddy regarding engines, I was just reading the FAQ on the site

I am rebuilding my 91 318i and have plans for a 3 plate LSD and a Rally 2100, sounds like your engine project will produce some fun times

Cheers!

marko · « **Reply #10 on:** November 13, 2008, 12:23:41 PM »

yeah... LOL it should be fun when its all finished up.

I told teddy I dont generally go past 5500 without cringing!

he freaked & was like 'dude, when you assemble the motor with our parts, PLEASE make sure you rev that f-er to 7800!'

now, if thats not confidence in your parts, then I dont know what is...

Quote from: roundel318;60625

Thats awesome!
I have been in correspondence with Teddy regarding engines, I was just reading the FAQ on the site
I am rebuilding my 91 318i and have plans for a 3 plate LSD and a Rally 2100, sounds like your engine project will produce some fun times
Cheers!

marko · « **Reply #11 on:** November 13, 2008, 12:24:12 PM »

+1

Quote from: Hodge;60615

MM is awsome, can't go wrong with them!