Author Topic: oem skid plate (Read 5757 times)

johnwoo · « **on:** October 04, 2008, 01:14:07 AM »

hey guys order an oem skid plate from bmw with the hardware. the parts didn't come with any instructions. anyone have instructions on how to get this on? where to drill how big to drill. thanks.

johnwoo · « **Reply #1 on:** October 08, 2008, 12:24:10 AM »

///m42 sport · « **Reply #2 on:** October 15, 2008, 01:06:54 AM »

Hey I wasn't aware of a OEM 318is skid plate. Can you post the part #?

Check out davelength.net -->cabrio-->front skid plate install

///m42 sport · « **Reply #3 on:** October 20, 2008, 12:19:18 AM »

part #?

JP 91iS · « **Reply #4 on:** October 21, 2008, 12:18:43 AM »

I used the part number in the bolts picture to find this on realoem, took 2 seconds:

02 FRONT AGGREGATE PROTECTIVE PLATE 51711971001

FITS FROM 9/87: (like is said on davelengths website...)
Part 51711971001 (FRONT AGGREGATE PROTECTIVE PLATE) was found on the following vehicles:

E30 318i SEDAN
E30 318is COUPE
E30 325e COUPE
E30 325e SEDAN
E30 325i SEDAN
E30 325i COUPE

///m42 sport · « **Reply #5 on:** October 21, 2008, 11:20:47 PM »

Yea, but the one you posted is for 87 and below. The one davelength has has a cutout for the oildrain plug for a m20 motor. I have the same one dave on my cabrio. I wanted to see if there was a 318is specific plate with a cutout for the m42 drain plug.

JP 91iS · « **Reply #6 on:** November 18, 2008, 07:39:03 PM »

From 9/87 means 87+

right?

johnwoo · « **Reply #7 on:** November 18, 2008, 11:36:09 PM »

i got the one with the part number: Part 51711971001

trying to see if there is better pics of the bolts in the back to see how those fit.

johnwoo · « **Reply #8 on:** November 18, 2008, 11:37:03 PM »

whoops double post

///m42 sport · « **Reply #9 on:** November 20, 2008, 10:37:38 PM »

What I did was find some nutserts, had them welded to the subframe since the e30 subframe has holes but no thread for the attachment point of skidplate.:rolleyes:

Then drilled the two holes up front under the bumpers

johnwoo · « **Reply #10 on:** November 21, 2008, 02:27:05 PM »

^^^where did you get those nutserts?

Birdman16 · « **Reply #11 on:** November 21, 2008, 07:20:55 PM »

Never seen that before... wish I had it when my car got stuck on the stone wall....

///m42 sport · « **Reply #12 on:** November 22, 2008, 11:21:17 PM »

I went to a local specialty hardware store, but can also get them online. I would rec going local since you need to size them up along with the bolt to go with them.

johnwoo · « **Reply #13 on:** November 24, 2008, 02:41:54 PM »

thanks for all the help guys, i just made my own holes lol

///m42 sport · « **Reply #14 on:** November 25, 2008, 10:07:43 PM »

Does your skidplate have the cutout so that you can change your oil with the skidplate attached?