Author Topic: Anyone ever hear of this? (Read 3594 times)

RustyTheDriver · « **on:** September 28, 2008, 02:33:16 PM »

So I was just lookin around, and I decided it would be fun to see what wiki has about our engine, I came across this interesting little tidbit

"Further, the long-stroke forged crankshaft from the M47 motor coupled with an overbore of +2 mm will make for a 2.1 L Stroker M42. The 86 mm pistons from a European 3.0 L S50 will produce a high compression, stroker M42 when coupled with the M47 crank. The addition of a MAF conversion from an M50 engine and properly setup cams, valvetrain, and tuning will yield potent output from the "lowly" M42."

Is this feasable? The M47 engine came out of a european diesel model that never hit the states. According to this....we can have a 2.1L using BMW parts and bump our engines to another level.

nuvolarossa · « **Reply #1 on:** September 28, 2008, 03:39:34 PM »

mmm search under swap/builds/turbo section... there are some running with M47 crank and different combos...

RustyTheDriver · « **Reply #2 on:** October 05, 2008, 12:13:55 PM »

yeah i'm getting nothing.... even the term m47 crank isn't showing up in either swap/builds/turbos or the engine + driveline sections

SheldonJace · « **Reply #3 on:** October 05, 2008, 12:59:31 PM »

Yea, I've never used the search on these boards to much avail.

But I'm willing to bet it was someone from this board that even submitted that information to wikipedia haha.

RustyTheDriver · « **Reply #4 on:** October 05, 2008, 06:01:20 PM »

well since where here talking about is it possible, do either the S14 heads or S14 exhaust manifolds fit on our cars?

GrindCulture · « **Reply #5 on:** October 05, 2008, 06:06:06 PM »

Quote from: RustyTheDriver;57924

well since where here talking about is it possible, do either the S14 heads or S14 exhaust manifolds fit on our cars?

No

dude8383 · « **Reply #6 on:** October 05, 2008, 06:28:26 PM »

Search for the user "Febi Guibo"

One of the first cars to use this kind of application.

I almost built an m42 stroker, but my love for inline 6 is too much to bear.

I was going to use:

M44 Crank
M44 Rods
S50 Pistons

Would have been a nice setup.

kowalski · « **Reply #7 on:** October 07, 2008, 02:53:10 AM »

i'm sleeping on top of an m47 crank.
I have a full turbo settup in the garage
I'm also sleeping on a haltech e8
I have a full motor waiting for this all, and a few more goodies once i've brought them all together.

RustyTheDriver · « **Reply #8 on:** October 07, 2008, 06:46:50 PM »

Jeez, I wish I had the money like you guys do. Workin on an part-time working students' paychecks, it's a little hard to afford the parts I want. So, Grindculture, winks aside, it is possible? I just wanted to ask because I'm not sure if the S14 exhaust flanges or ports match, much less the head.

kowalski · « **Reply #9 on:** October 08, 2008, 01:39:55 PM »

s14 parts will be more expensive then tracking down the parts I have.

FYI, i'm also a student, a 4th year business major. I just find really good summer jobs, and really good deals on parts:D

tjts1 · « **Reply #10 on:** October 08, 2008, 02:50:07 PM »

http://www.metricmechanic.com/pdfs/metric-mechanic-m42-and-m44-engine-booklet.pdf

RustyTheDriver · « **Reply #11 on:** October 08, 2008, 08:42:14 PM »

yeah, i'm going to the JY next week, so hopefully good find! lawl so if i can, keep my eyes open for some awesomeness parts. but as for now, I think i'm going to try and save for M3 fenders