Author Topic: head studs (Read 3154 times)

George77 · « **on:** September 20, 2008, 08:59:02 PM »

Hi guys,does someone know where I can get head studs from.Looks like ARP doesn't make studs for our engine or maybe I.m wrong.I.m a bit afraid to push it more without at least head studs.

bearsbmw · « **Reply #1 on:** September 20, 2008, 11:31:14 PM »

14-15psi will be fine without studs... Headgasket is way more important!! I thanks you friend

rob_e30 · « **Reply #2 on:** September 21, 2008, 12:03:52 AM »

VAC sells ARP studs. It's the same as the M/S50 but uses fewer studs.

George77 · « **Reply #3 on:** September 21, 2008, 09:16:48 AM »

Thanks Rob ,are you sure the studs are the same?,do I need to modify them?

Boosted E30 · « **Reply #4 on:** September 21, 2008, 12:38:28 PM »

vacmotorsports has them for sure thats where i got mine i would get their steel head gasket to drop cp to 8.25:1 they told me it should be good for 20psi but ill see how that works out

rob_e30 · « **Reply #5 on:** September 21, 2008, 01:07:58 PM »

I'm sure as I got my set from the. I went back to the stock HG after going through 2 MLS.

Boosted E30 · « **Reply #6 on:** September 22, 2008, 07:15:05 PM »

ya im on my second MLS but thats cuz my head cracked the first one didnt even fail it was my own stupidity not watching engine temp