Author Topic: Measure value off a sensor camshaft (Read 2293 times)

Fab318IS · « **on:** March 19, 2008, 11:31:28 PM »

Hello everybody,

I am Fabrice, i live from Belgium , i posses a bmw E30 - 318IS
I like this car !

(i don't find the presentation thred but i speak a little english

)

I need your help for this next problem :

I have a question on sensor camshaft, the piece is registred as a number 6 :
http://bmwfans.info/original/E30/2-T/318is-M42/ECE/L/M/1990/03/mg-11/ill-11_2683/

How much does the resistance measure ?
I have measured and i find 1567 ohm.

i have measured between borne 1 and borne 2 with the multimeter

Can you help me pease?

Thank you very much

Fabrice

RED IS 91 · « **Reply #1 on:** March 20, 2008, 04:00:44 PM »

Welcome to the M42club.

It should be 1280 + or - 10 %
good luck

Fab318IS · « **Reply #2 on:** March 21, 2008, 01:16:46 AM »

Hello,

Thank you for your reply.

Do you know the value of resistance of the sensor pulse?
Piece n�12 http://bmwfans.info/original/E30/2-T/318is-M42/ECE/L/M/1990/03/mg-11/ill-11_0156/

Me I measure 568 ohm

568 ohm for sensor pulse and 1568 ohm for sensor camshaft,
It should not have the same measure

?

Thank you

Fabrice

RED IS 91 · « **Reply #3 on:** March 21, 2008, 04:10:42 AM »

It should be around 550-560 ohms for the crankshaft position sensor which is number 12 in you picture. It sounds like your camshaft and crankshaft position sensors are good .