Author Topic: Was EATON supercharger, now TURBO (Read 43870 times)

Vladi · « **Reply #15 on:** February 10, 2008, 04:27:33 PM »

Hopefuly this week i'll start installing it.

bimma_318iS · « **Reply #16 on:** February 12, 2008, 07:28:23 PM »

make sure to keep us posted. i am uber interested in your progress. i will be visiting this thread often.

Vladi · « **Reply #17 on:** February 13, 2008, 07:10:54 AM »

On Thursday I'm going to the shop to figure out the size and installation options for the interkuhler and order it.
More updates soon, i hope.

Vladi · « **Reply #18 on:** February 28, 2008, 09:33:44 AM »

The injectors arrived! Lucas 380cc.

ludiagsm · « **Reply #19 on:** February 29, 2008, 11:35:49 AM »

i don't like your throttle zone ,and air delivery hose in to supercharger

Vladi · « **Reply #20 on:** February 29, 2008, 01:29:56 PM »

That setup was nuvolarossa's.

ludiagsm · « **Reply #21 on:** February 29, 2008, 03:00:39 PM »

however those things must be fixed

Vladi · « **Reply #22 on:** March 18, 2008, 02:53:27 PM »

After many annoying delays finally began work on the car today...i moved the power steering reservoir and took the radiators out. Tomorrow we'll measure the intercooler size and order it.

bmwman91 · « **Reply #23 on:** March 19, 2008, 08:43:21 AM »

Good project! I demand more pictures! Will you be using a BOV or an air bypass valve to bleed out the boost when not needing boost?

Vladi · « **Reply #24 on:** March 19, 2008, 04:47:17 PM »

I'll take some pics tomorrow, hopefully. I'll use a bypass valve.

futron.sim · « **Reply #25 on:** March 20, 2008, 09:28:19 AM »

Wow! Nice supercharger you have there! I was pretty fired up after reading all these charging stuff and decide to order one on ebay.

Its a eaton M90 blower. Now thinking how to get it to fit onto my car. Probably going to custom build an intake manifold similar to the DASC one.

Vladi · « **Reply #26 on:** March 20, 2008, 09:52:30 AM »

Crappy pics...didn't have my camera on me so shot them with the phone. I'll take better ones the next days when i hope there will be more progress made.

sand_m4n · « **Reply #27 on:** March 30, 2008, 10:30:58 AM »

Hey futron.sim are you sure the m90 wont be to big? If its not i am definitely going to buy one of these bad boys! i was looking at them on ebay also and their not to badly priced. Besides the supercharger and byepass valve and new belts what do you need to make it work? ?

ose30 · « **Reply #28 on:** March 31, 2008, 10:58:09 AM »

We just bought this Eaton for my son's Golf VR6 project.

drrtybyl · « **Reply #29 on:** April 01, 2008, 08:33:37 AM »

Nuvola -- What did you have to fabricate to get your blower to fit on your M44? Did you just cut a bracket to mount it to the upper intake manifold and get rid of the lower intake altogether?