Author Topic: 1211 fault code (Read 4620 times)

Vladi · « **on:** October 03, 2007, 03:56:41 PM »

I used the pedal test and it turned out 1211 - DME Fault.

What's the idea? The engine runs great.

RED IS 91 · « **Reply #1 on:** October 03, 2007, 04:56:11 PM »

1211 is DME control unit
whoops didn't see the rest .

kowalski · « **Reply #2 on:** October 03, 2007, 06:41:20 PM »

I just put a haltech in and i have a perfectly good ecu your welcome to buy:)

Vladi · « **Reply #3 on:** October 04, 2007, 12:29:21 PM »

You're so kind.

As i said the engine runs perfect and i'm not changing the ECU because of a light that's probably wrong. :rolleyes:

St�ck · « **Reply #4 on:** October 04, 2007, 05:22:34 PM »

Its pretty rare to see a 1211 fault, because generally speaking the ECU is bad and cannot output fault codes.

kowalski · « **Reply #5 on:** October 05, 2007, 01:30:23 AM »

on a new note, what kind of wheels are those? they look rEAL nice.

Vladi · « **Reply #6 on:** October 05, 2007, 12:10:30 PM »

BBS RC's 090 8Jx17 and ET10 with spacer. 5x120.

kowalski · « **Reply #7 on:** October 05, 2007, 12:26:26 PM »

Quote from: Vladi;35078

BBS RC's 090 8Jx17 and ET10 with spacer. 5x120.

i had a feeling. Some day i'll do the 5 bolt swap... some day...

Vladi · « **Reply #8 on:** October 07, 2007, 04:55:05 PM »

Well no one can do it all at the same time. Some work on the engine and then on looks others the other way around.

Vladi · « **Reply #9 on:** November 17, 2007, 03:54:54 AM »

Ok so i changed the ground cable between the engine and chassis yesterday and the check engine light turned off (read first post). Drove the car about 10km and it lit up again, throwing 1226. Nice improvement. :rolleyes: