Author Topic: COP Conversion Brackets (Read 65156 times)

rfritz · « **Reply #60 on:** January 04, 2008, 01:48:31 PM »

BTW - Thanks for bringing the bracket by, I will send everything today.

haledj · « **Reply #61 on:** January 04, 2008, 01:54:56 PM »

Quote from: rfritz;40456

So with these you don't have to cut the harness? I already started to disect mine.....:mad:

You do not have too, but doing so will make a much cleaner install. BMWman91 did a very good job writing up the process on his website, I would check that out.

Quote from: rfritz

BTW - Thanks for bringing the bracket by, I will send everything today.

No problem, it is always good to meet fellow e30'ers especially m42 people, and your car is beatiful.

haledj · « **Reply #62 on:** January 27, 2008, 11:28:40 PM »

I just made several more, ready to ship out.

Now accepting interesting trades!

Simon S · « **Reply #63 on:** January 28, 2008, 05:58:45 PM »

I wish to order a bracket and hardware.

pm sent. (also through r3vlimited)

haledj · « **Reply #64 on:** February 12, 2008, 11:38:29 PM »

TheNeek · « **Reply #65 on:** February 14, 2008, 02:58:10 PM »

removed... wasn't the right thread to post this in.

haledj · « **Reply #66 on:** February 14, 2008, 03:11:34 PM »

Quote from: TheNeek;42787

removed... wasn't the right thread to post this in.

A few of the holes there are in different places than I use. Most notably, the one in the upper right corner, and the mounting holes and the big holes are not inline.

haledj · « **Reply #67 on:** March 09, 2008, 06:49:59 PM »

I have a new batch done hot and fresh off the mill

***St. Patrick's day Special!!***

If you order a plate between now and the 17th I will include the hardware for free ($7 value).
That is $75 for the plate and the hardware shipped

haledj · « **Reply #68 on:** March 09, 2008, 08:41:30 PM »

neat link explaining Coil on Plug ignition

D. Clay · « **Reply #69 on:** March 09, 2008, 09:57:26 PM »

Cheap coils. FCPGroton sells them on ebay for $25 each in lots of 6, 8, and 12. There are several BMW part numbers that will work. M54 is 12131748018. Maybe some folks could go together and buy 8 or 12 and split them up.

haledj · « **Reply #70 on:** March 09, 2008, 10:34:54 PM »

Quote from: D. Clay;44400

Cheap coils. FCPGroton sells them on ebay for $25 each in lots of 6, 8, and 12. There are several BMW part numbers that will work. M54 is 12131748018. Maybe some folks could go together and buy 8 or 12 and split them up.

good find

:D

Asserti · « **Reply #71 on:** March 12, 2008, 06:52:31 AM »

Got some questions:

http://cgi.ebay.com/ebaymotors/BMW-M54-N62-Ignition-Coils-Brand-New-OEM-E39-E46-E60_W0QQcmdZViewItemQQcategoryZ33689QQihZ003QQitemZ130204468865QQrdZ1QQsspagenameZWDVW

Will these work?
And what about the bosch connector disassembly, why is that needed and is it still needed with these coils? Is it necessary to lengthen the electronic wires, leading to the connectors?

thx!

haledj · « **Reply #72 on:** March 17, 2008, 08:49:30 PM »

No, those are not the coils you want. The coils you want have mounting holes on two arms that extend from the coil, like in the pictures I posted. You do not need to disassemble the connectors, but it is the best way to shorten the wires. The wires do not need to be shortened, but it makes for a cleaner installation.

agreen · « **Reply #73 on:** March 22, 2008, 09:50:04 AM »

i know it has been a little while but are these still avalable? ? ?

will you shipa full set to the uk including all the bits and pices ?

thanks arron

ApocolypseAutoEngineering · « **Reply #74 on:** March 23, 2008, 01:24:44 AM »

Yes indeed this would make and addition to my light mods nice.

Author Topic: COP Conversion Brackets (Read 65156 times)

agreen