Author Topic: afm (Read 3182 times)

logger · « **on:** July 25, 2007, 01:41:31 PM »

How much can adjust the spring in the afm ?

Shocker · « **Reply #1 on:** July 25, 2007, 06:45:58 PM »

You dont want to mess with the spring it will just make you car run worse. Why do you want to modify it?

logger · « **Reply #2 on:** July 25, 2007, 09:09:59 PM »

problems with car not running right check my thread a few threads down . After messing with this it has seemed to help

??

badboypolar · « **Reply #3 on:** July 25, 2007, 11:35:14 PM »

I had the same problem you are having. I bought a rebuilt one from pelican. It's like driving a brand new car.

Save yourself the headache and buy a new, well rebuilt, unit.

Shocker · « **Reply #4 on:** July 26, 2007, 12:02:52 AM »

Quote from: badboypolar;30423

I had the same problem you are having. I bought a rebuilt one from pelican. It's like driving a brand new car.

Save yourself the headache and buy a new, well rebuilt, unit.

If your going to get a new AFM at least check into a MAF conversion.

badboypolar · « **Reply #5 on:** July 26, 2007, 09:44:58 AM »

Well I can't because I prepping for SpecE30 and the MAF conversion isn't allowed.

bmwman91 · « **Reply #6 on:** July 26, 2007, 11:49:39 PM »

Look into a rebuilt one at Pelican. $180 for it...a MAF conversion will run you considerably more. No power gains to be had either, though driveability improves greatly.

Shocker · « **Reply #7 on:** July 27, 2007, 12:13:50 AM »

Quote from: bmwman91;30509

Look into a rebuilt one at Pelican. $180 for it...a MAF conversion will run you considerably more. No power gains to be had either, though driveability improves greatly.

That depends on if your running boost. The Stock AFM is great on a Stock motor but it does restrict if you�re running over 12 psi.

bmwman91 · « **Reply #8 on:** July 27, 2007, 05:40:36 PM »

Indeed. Can the stock AFM even give a useful output above like 7psi of boost?