Author Topic: S50 trans (Read 2457 times)

Gunni · « **on:** February 14, 2007, 07:00:48 AM »

Could I make that work?
I have one it�s from my S50B30 Euro,

I can get a clutch kit for it cheap,
and would thus want a lighter 240mm flywheel.
Actual savings is pretty good as a clutch kit for my now M20 setup is mroe then $400. and this clutch kit is not even close

This would be ideal when I turbo the M42 and
would use with a 3,25diff I have.

So does the M50/S50 transes bolt on?

2002maniac · « **Reply #1 on:** February 14, 2007, 07:57:52 AM »

I know it bolts up to the engine. Not sure about the rear mount or driveshaft length though.

Vladi · « **Reply #2 on:** February 14, 2007, 08:01:33 AM »

Only way to know for sure is to try....if you ask me i don't think it will work, unfortunately.

Gunni · « **Reply #3 on:** February 14, 2007, 08:12:33 AM »

I don�t have concerns about the driveshaft as I have a number of them,

If the trans fits the engine, I should be able to bolt up a 240mm flywheel + a 240mm clutch kit,
Shouldn�t that be a safe assumtion,