Author Topic: Removing and reinstalling m42 valves (Read 3246 times)

jrobie79 · « **on:** October 18, 2016, 12:30:50 PM »

So I'm getting my head resurfaced and taking the valve train apart would save me a boatload as opposed to having the machine shop do it. I have searched to no avail, how do you remove and reinstall the valves? Is there a trick? Special tools? Anything else I should look at while I'm in there?

colin86325 · « **Reply #1 on:** October 19, 2016, 11:07:06 AM »

You need to use a vale spring compressor tool to compress the spring, then you remove the retaining collets and relax the spring. There should be videos on YouTube showing this procedure.

Jaredmac11 · « **Reply #2 on:** October 20, 2016, 07:24:22 AM »

I'll be doing that job this weekend. I plan to use the tool made by Lisle. Its basically a shaft you can hammer the springs with to re move the valve clips safely.

Jaredmac11 · « **Reply #3 on:** October 23, 2016, 06:52:36 PM »

Here's a quick video of the tool. Pardon my garage.

https://youtu.be/lk041IcB4M0

1998ccc · « **Reply #4 on:** October 23, 2016, 09:31:41 PM »

Private video on my computer.

Jaredmac11 · « **Reply #5 on:** October 23, 2016, 10:29:57 PM »

Updated. Kinda new to making YouTube videos.

Author Topic: Removing and reinstalling m42 valves (Read 3246 times)

jrobie79

Removing and reinstalling m42 valves

colin86325

Re: Removing and reinstalling m42 valves

Jaredmac11

Re: Removing and reinstalling m42 valves

Jaredmac11

Re: Removing and reinstalling m42 valves

1998ccc

Re: Removing and reinstalling m42 valves

Jaredmac11

Re: Removing and reinstalling m42 valves