Author Topic: E36 M42 DME 1.7.2 error  (Read 4863 times)

selespeed

  • Full Member
  • ***
  • Thank You
  • -Receive: 1
  • Posts: 112
    • View Profile
E36 M42 DME 1.7.2 error
« on: August 24, 2016, 01:26:36 AM »
i have been having this lately or maybe for a few months already...

DME 1.7.2 errors when diagnosed:

100 Engine Control System

Does anyone know what this error is? How can I rectify this?

In addition, the service indicator light stopped at "orange" warning level. But did not advance to RED even after 6 months of driving. But i changed my oil at regular intervals by monitoring the mileage

Thanks

teo


Ivan_S42

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 4
  • Freshly Registered!
    • View Profile
Re: E36 M42 DME 1.7.2 error
« Reply #1 on: August 25, 2016, 05:40:18 PM »
I assume on some of the sensors (cams, crank or oxygen)
I saw somewhere a table of sensors resistance so you could do a checkup on your own to see if sensors are not broken.

Hope it helps

selespeed

  • Full Member
  • ***
  • Thank You
  • -Receive: 1
  • Posts: 112
    • View Profile
Re: E36 M42 DME 1.7.2 error
« Reply #2 on: August 25, 2016, 11:34:31 PM »
I assume on some of the sensors (cams, crank or oxygen)
I saw somewhere a table of sensors resistance so you could do a checkup on your own to see if sensors are not broken.

Hope it helps

the sensors are new! i don't think they're broken. because if they're, DME would have recorded these errors. Btw, error code 100 is about DME. Where is the relay for DME located?

colin86325

  • Hero Member
  • *****
  • Thank You
  • -Receive: 15
  • Posts: 764
    • View Profile
Re: E36 M42 DME 1.7.2 error
« Reply #3 on: August 26, 2016, 10:40:11 AM »
Yeah, that seems like an ECU-related  code.

The relay will be under the plastic cover that runs across the top of the firewall.

selespeed

  • Full Member
  • ***
  • Thank You
  • -Receive: 1
  • Posts: 112
    • View Profile
Re: E36 M42 DME 1.7.2 error
« Reply #4 on: August 26, 2016, 02:30:41 PM »
Yeah, that seems like an ECU-related  code.

The relay will be under the plastic cover that runs across the top of the firewall.

thanks. i checked there are 3 relays of BMW M colors. which is the one? i wonder if i can get a manual on this. wiring diagram

1998ccc

  • Full Member
  • ***
  • Thank You
  • -Receive: 6
  • Posts: 128
    • View Profile
Re: E36 M42 DME 1.7.2 error
« Reply #5 on: August 26, 2016, 11:21:48 PM »
Yeah, that seems like an ECU-related  code.

The relay will be under the plastic cover that runs across the top of the firewall.

thanks. i checked there are 3 relays of BMW M colors. which is the one? i wonder if i can get a manual on this. wiring diagram

Normally white.  It's the one with 5 pins  The other 2 have 4 and are fuel pump and o2 heater.

selespeed

  • Full Member
  • ***
  • Thank You
  • -Receive: 1
  • Posts: 112
    • View Profile
Re: E36 M42 DME 1.7.2 error
« Reply #6 on: September 09, 2016, 10:40:26 AM »
Yeah, that seems like an ECU-related  code.

The relay will be under the plastic cover that runs across the top of the firewall.

thanks. i checked there are 3 relays of BMW M colors. which is the one? i wonder if i can get a manual on this. wiring diagram

Normally white.  It's the one with 5 pins  The other 2 have 4 and are fuel pump and o2 heater.

i have the relay replaced and the error still appears even after resetting it. therefore, the problem is not solved and is due to something else. i am wondering if persistent problem in a/c is the cause of the problem. the error code 85 is due to a/c compressor that is forced on all the time (e36 DME in a e30 chassis). so this error 85 is always on. maybe the mechanic did something to make it on all the time in order to  overcome a/c problem.

how do you guys solve the a/c compressor problem with a e36m42 engine in e30?

cristimm

  • Full Member
  • ***
  • Thank You
  • -Receive: 3
  • Posts: 160
    • View Profile
Re: E36 M42 DME 1.7.2 error
« Reply #7 on: September 11, 2016, 07:22:10 AM »
i have been having this lately or maybe for a few months already...

DME 1.7.2 errors when diagnosed:

100 Engine Control System

Does anyone know what this error is? How can I rectify this?

In addition, the service indicator light stopped at "orange" warning level. But did not advance to RED even after 6 months of driving. But i changed my oil at regular intervals by monitoring the mileage

Thanks

teo

Do you have a custom chip installed?

selespeed

  • Full Member
  • ***
  • Thank You
  • -Receive: 1
  • Posts: 112
    • View Profile
Re: E36 M42 DME 1.7.2 error
« Reply #8 on: September 11, 2016, 10:24:20 PM »
i have been having this lately or maybe for a few months already...

DME 1.7.2 errors when diagnosed:

100 Engine Control System

Does anyone know what this error is? How can I rectify this?

In addition, the service indicator light stopped at "orange" warning level. But did not advance to RED even after 6 months of driving. But i changed my oil at regular intervals by monitoring the mileage

Thanks

teo

Do you have a custom chip installed?

No. everything is stock. original DME