Author Topic: "Winged" Brass Bleeder Screw Interest? (Read 3058 times)

ClayW · « **on:** September 25, 2012, 02:29:00 PM »

I'm looking into having a run of custom brass coolant bleeder screws made with a tab (or wings) so that it can be tightened or loosened by hand (with gloves!).
Imagine the brass coolant bleeder screws from Turner Motorsports with no need to find a big screwdriver or a quarter.

Would anyone be interested in one? I would imagine the price being in the $15/each range.

DesktopDave · « **Reply #1 on:** September 25, 2012, 02:41:35 PM »

Count me in, I'll go up to $20 - excellent idea!

ClayW · « **Reply #2 on:** September 25, 2012, 05:03:17 PM »

Quote from: DesktopDave;116226

Count me in, I'll go up to $20 - excellent idea!

Can you measure the clearance from the top of the existing bleeder screw to the underside of the hood for me?

DesktopDave · « **Reply #3 on:** September 25, 2012, 09:35:42 PM »

The car is currently getting a state inspection - but if they ever get the emissions test done I'll let you know.

DanOKC · « **Reply #4 on:** September 26, 2012, 07:17:22 PM »

I just checked mine. You have at least an inch or more. Radiator cap height is below the hood, so figure 1/2" above that would be safe.

BETTERTECH824 · « **Reply #5 on:** April 26, 2013, 01:59:18 AM »

id love to have one how can i get it?
mike