« previous next »
Pages: [1] 2 3   Go Down

Author Topic: The Specialized Tool Loaner Club  (Read 34211 times)

Zoso

  • Sr. Member
  • ****
  • Thank You
  • -Receive: 0
  • Posts: 267
    • View Profile
    • http://zoso.no-ip.org/cars-318i.html
The Specialized Tool Loaner Club
« on: November 21, 2006, 02:59:52 PM »
It's annoying but now and then you need a specialized tool to help you fix up your 318 - maybe it's a cam alignment tool or maybe it's a specialized puller for rear subframe mount bushings.

Along with a lot of M42 expertise, the great people on this forum are very generous and usually have no problems loaning specialized tools to other E30 owners.  

Use this thread to request specialized tool.  The easier you make it for the sender to ship you the tool, the best change you have of getting it.  Try to send him a prepaid shipping label or a label that charges your account.  If not, you can always paypal him some funds.
Logged

billb

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 30
    • View Profile
I have a Catalyst Racing cam alignment fixture for rent
« Reply #1 on: November 21, 2006, 05:52:32 PM »
I'll rent it for $5 per use and you pay shipping both ways.  It's worked well for me and a few others already.  You lose or break it and you replace it for me.  Sound like a deal?
Logged
Bill B.
95 525i auto, 5/94
ex-91 318is, 3/90 -SOLD 3/09-;)

kmack

  • Guest
The Specialized Tool Loaner Club
« Reply #2 on: December 20, 2006, 11:42:18 AM »
Is this the tool that locks both camshafts while pulling the head off the block?  I'm looking at starting this proceedure this weekend.  I guess I need this and the flywheel locking pin.  I can paypal the costs including shipping to you right away if possible.  Please let me know.  Thanks.
Logged

billb

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 30
    • View Profile
Yes, this keeps the cams aligned at TDC.
« Reply #3 on: December 23, 2006, 08:26:04 AM »
Quote from: kmack;15945
Is this the tool that locks both camshafts while pulling the head off the block?  I'm looking at starting this proceedure this weekend.  I guess I need this and the flywheel locking pin.  I can paypal the costs including shipping to you right away if possible.  Please let me know.  Thanks.



I'm sorry I didn't check the board until today, so might have missed a shipping window.  I can put it in priority mail either today or Tuesday (today if my post office is open).  

Here's a photo of the tool:  

If you want to Paypal $5 plus $5.40 shipping ($4.05 priority mail and $1.35 insurance), I'll put it in the mail ASAP.  PM me when you've done that, as I don't check this specific topic often.  EMail address is fgump_at_bellsouth_dot_net.

Thanks!
« Last Edit: December 23, 2006, 08:27:11 AM by billb »
Logged
Bill B.
95 525i auto, 5/94
ex-91 318is, 3/90 -SOLD 3/09-;)

D. Clay

  • Former *********
  • Legendary
  • ******
  • Thank You
  • -Receive: 0
  • Posts: 1330
    • View Profile
The Specialized Tool Loaner Club
« Reply #4 on: January 13, 2007, 12:10:27 PM »
Just a bump to make sure we get everything listed. I found several other tools in other forum sections but this is stickied  and just for tools.
Logged

16v of Fury

  • Guest
The Specialized Tool Loaner Club
« Reply #5 on: June 05, 2007, 06:52:23 PM »
-Want To Borrow-

Hoping to borrow an M42 TDC tool, for locking a camshaft at TDC, as I will be pulling the head off my M42 and replacing it.

Does anyone have one?

I am, of course, willing to pay for the use of the tool --- the tool comes in at $45 shipped, on Ebay, so savings won't be HUGE... but no need to buy a tool that I'll probably never use again, if I can avoid it.

Thanks,
Logged

billb

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 30
    • View Profile
You've posted in the right place.
« Reply #6 on: June 07, 2007, 01:34:42 PM »
Quote from: 16v of Fury;27157
-Want To Borrow-

Hoping to borrow an M42 TDC tool, for locking a camshaft at TDC, as I will be pulling the head off my M42 and replacing it.

Does anyone have one?

I am, of course, willing to pay for the use of the tool --- the tool comes in at $45 shipped, on Ebay, so savings won't be HUGE... but no need to buy a tool that I'll probably never use again, if I can avoid it.

Thanks,


The tool I have keeps intake and exhaust cams set together while you do what you need (timing chain, head gasket, whatever).  $5 per use and you pay shipping both ways (works out to a total for you of like $15 or so).  PM me for more details.
Logged
Bill B.
95 525i auto, 5/94
ex-91 318is, 3/90 -SOLD 3/09-;)

Frankie

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 165
    • View Profile
The Specialized Tool Loaner Club
« Reply #7 on: August 11, 2007, 01:21:18 AM »
Can some one take excact measures of the camshaft locking tool. I would be nice to fabricate one by myself.
Logged

BMW318STS

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 1
    • View Profile
Specialized puller for rear subframe mount bushings.
« Reply #8 on: August 11, 2007, 07:33:08 PM »
Does this really exist?
I have heard of it, but have been unable to locate one.
Logged

Lund8200

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 24
    • View Profile
The Specialized Tool Loaner Club
« Reply #9 on: September 02, 2007, 04:39:17 AM »
I have the drawings for camshafttool, ridgid chain tensioner, FW locking tool.
It is in a PDF format, approx. 300 Kb.
Will send it to anyone who wants it by E-mail.
Logged

D. Clay

  • Former *********
  • Legendary
  • ******
  • Thank You
  • -Receive: 0
  • Posts: 1330
    • View Profile
BMW Rear Subframe bushing tool.
« Reply #10 on: September 02, 2007, 04:03:40 PM »
Quote from: BMW318STS;31458
Does this really exist?
I have heard of it, but have been unable to locate one.
Available from Pelican for $363 or from Home Depot for less than $20.
http://www.pelicanparts.com/BMW/catalog/shopcart/BMWM/POR_BMWM_TOOLS1_pg2.htm
http://www.m42club.com/forums/attachment.php?attachmentid=388&d=1156878016
http://www.m42club.com/forums/attachment.php?attachmentid=389&d=1156878016
Just hope the small ends of the old bushings don't break off in the body or you will still probably have to drop the subframe.
Logged

bmwman91

  • Administrator
  • Legendary
  • *****
  • Thank You
  • -Receive: 33
  • Posts: 2798
    • View Profile
    • http://www.e30tuner.com/
The Specialized Tool Loaner Club
« Reply #11 on: February 29, 2008, 10:53:59 AM »
Does anyone in the CA Bay Area have a random-orbital polisher I can borrow for a day?  My paint is getting really, REALLY shabby and I don't feel like doing the full 3-step polish job by hand again lol.  A 6-pack or some other form of payment can be arranged for letting me borrow it.  Thanks!
Logged

06/05/2011 - 212,354 miles
Visit HERE for a plethora of 318iS stuff and some other randomness.  Would you say I have a, plethora, of pinatas?

sheepdog

  • Site Admin
  • Administrator
  • Legendary
  • *****
  • Thank You
  • -Receive: 4
  • Posts: 1272
    • View Profile
The Specialized Tool Loaner Club
« Reply #12 on: March 07, 2008, 12:14:58 PM »
Anyone have the wheel bearing tools?
Logged
"When trouble arises and things look bad, there is always one individual who perceives a solution and is willing to take command. Very often, that individual is crazy." --Dave Berry

Quincy56

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 32
    • View Profile
The Specialized Tool Loaner Club
« Reply #13 on: July 01, 2008, 06:40:08 PM »
I "made" a subframe installing tool.  Removing them is easy with the subframe out.  Just use a sawsall.

http://c-76-24-135-117.hsd1.ma.comcast.net/barberry/subframe_bushing_tool.htm
Logged

92 325ic - Isabelle
91 318i - Oscar
89 325i - Otis - RIP
95 Volvo 850 Wagon (needs a name) - Winter Beater

BMWManiac

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 116
    • View Profile
The Specialized Tool Loaner Club
« Reply #14 on: July 10, 2008, 12:19:56 PM »
Anyone have the Bilstein tool for the front shocks/struts?
Logged
2006 Interlagos Blue Z4M Coupe
Premium pack, navigation, heated seats

1997 Artic Silver M3
Built motor + SC62 + TRM tune
545rwhp/520rwtq
Pages: [1] 2 3   Go Up
« previous next »