Author Topic: Upgrade E36 diff to medium case (Read 2196 times)

Bill K · « **on:** June 04, 2012, 06:07:40 PM »

I need to update the diff in my DA-powered E36 M42 to a medium case unit as I have just broken a tooth on the CW/Pinion of the original small case LSD. I know the medium case will bolt in and the tailshaft and half-shafts will no longer fit but would appreciate advice on the parts needed.

bmwman91 · « **Reply #1 on:** June 04, 2012, 06:40:10 PM »

Why not use an E30 medium case diff from a 325?

Also towing to the driveline section......

wazzu70 · « **Reply #2 on:** June 05, 2012, 11:23:53 AM »

I believe the E36 differentials have different mounting. Its not as simple as a cover swap like it is between the older models.

romkasponka · « **Reply #3 on:** June 05, 2012, 12:56:04 PM »

As I know drive-shaft will fit, but for shure you will have to replace half-shafts. I am running this setup. My friend did this conversion for me and he told me that you can remove something from drive-shaft to shorten it a little.