Author Topic: Anyone Have the "AFM Extension Cord" On Their Car? (Read 2205 times)

bmwman91 · « **on:** July 10, 2011, 12:01:04 PM »

I've noticed that some M42 AFMs have an extension cord thingy between them & the ECU harness. If you have one, can you do me a favor and look inside the male end (the end of the extension that plugs into the ECU harness) and either take a picture of the numbers, or post the BMW PN in here? It would also be cool if you could pull back the rubber boot & post the AMP PN molded onto the back side. Thanks!

DesktopDave · « **Reply #1 on:** July 10, 2011, 12:13:56 PM »

I pulled mine when I got the car to troubleshoot a no-start issue. It was waterlogged & setting AFM 1915 errors. If I can dig it out I'll get the info for you later today.

DesktopDave · « **Reply #2 on:** July 10, 2011, 12:30:24 PM »

BMW 1 734 516.3 (Bosch 1 284 463 500)

Female pin socket (AFM side):
BMW 171812 6
AMP 928635-1 (center) also 828709-1 (case)

Male pin socket (harness side):
BMW 17181 25
AMP 828710-1

bmwman91 · « **Reply #3 on:** July 10, 2011, 02:42:16 PM »

Sweeeeet. Thanks! I think that this MAF kit will end up being plug & play after all.