Author Topic: E36 M42 turbo install (Read 11615 times)

Casey Belarde · « **on:** July 13, 2010, 04:15:41 PM »

has any one put a turbo into their E36 M42?
I have been looking for tips and pictures of others installs but all I see are E30 M42 turbo installs

thanks for the help in advance

Casey

clutchkick · « **Reply #1 on:** July 14, 2010, 12:55:50 AM »

google search....

Burt_318iS · « **Reply #2 on:** July 14, 2010, 08:06:34 PM »

Check back over the next few months.. I will be doing mine. Its a E36 and were gonna beef it up nice nice. :-)

bmwconnect · « **Reply #3 on:** July 14, 2010, 08:12:32 PM »

I have a done it on the e36...I will post pictures tomorow

Casey Belarde · « **Reply #4 on:** July 18, 2010, 07:53:35 PM »

any pictures bmwconnect??? I wanna see it, is it an under manifold turbo
found a kit on ebay looked pretty decent

bmwconnect · « **Reply #5 on:** July 18, 2010, 08:44:48 PM »

Hey was very busy this weekend ... Will post tomorrow for sure... My setup is bottom mount

bmwconnect · « **Reply #6 on:** July 19, 2010, 04:52:00 PM »

Pictures of my personal setup producing around 270-280whp@14-15psi on pump gas

Intercooled, 60Lb injectors, Motronic tuned, T3/T4 hybrid china turbo rebuilt with garret seals, internal wastegate, ebay knock-off blow off valve, stock internals(metric blue head studs)

El-Kanal · « **Reply #7 on:** July 21, 2010, 05:42:58 AM »

What mods were done to the AFM ?

So you're running standard Motronic just remaped? Thanks

nuvolarossa · « **Reply #8 on:** July 21, 2010, 07:27:14 AM »

bmwconnect, do you have pictures of the underside? just curious about the wastegate clearance!

bmwconnect · « **Reply #9 on:** July 21, 2010, 09:21:19 AM »

Quote from: El-Kanal;94788

What mods were done to the AFM ? So you're running standard Motronic just remaped? Thanks

Afm is not modded... I opened it up to check the spring and pention meter wiper arm condition and yes it's the Motronic 1.7.2 with my tune

bmwconnect · « **Reply #10 on:** July 21, 2010, 09:23:37 AM »

Quote from: nuvolarossa;94792

bmwconnect, do you have pictures of the underside? just curious about the wastegate clearance!

I have none at this time but waste gate is internal anyway so there wouldn't be much to see... next time its up in the air I will gladly take some shots for ya though

bmwconnect · « **Reply #11 on:** July 21, 2010, 09:29:10 AM »

here is some pulls with 15psi and conservative ignition timing so at 3800rpm to 7000rpm it's at 16degs advance....When I run 20degs advance it's much quicker then those videos and if I advance to 23 degs I get some mild detonation so 19-20 degs is a good point for 91 octane

http://www.youtube.com/watch?v=tN-mR6P0MWc
http://www.youtube.com/watch?v=M38uEQetPKU
__________________

vtrigger77 · « **Reply #12 on:** July 21, 2010, 01:01:03 PM »

nice thread guys.. im planning on putting a turbo on my 93 318is as well. i already installed cames and it made a difference so turbo is the next step..

bmwconnect · « **Reply #13 on:** July 21, 2010, 01:04:46 PM »

Quote from: vtrigger77;94813

nice thread guys.. im planning on putting a turbo on my 93 318is as well. i already installed cames and it made a difference so turbo is the next step..

Where are you located? I could come and tune it for ya

vtrigger77 · « **Reply #14 on:** July 21, 2010, 01:05:58 PM »

im in socal.