Author Topic: manchuk (Read 18531 times)

romkasponka · « **Reply #30 on:** October 01, 2010, 03:29:32 PM »

Quote from: manchuk;97042

abandoning supercharger project goin turbo sorry for getting ur hopes up guys (TORBONETICS T3/T4 HYBRID)

Good decision.

p.s. "mess under the intake delete" that way IMHO is better, better head cooling, X-flow....

manchuk · « **Reply #31 on:** October 13, 2010, 03:19:17 PM »

-ordered m50 manifold to cut last to cylinders off ,it seems very logical for the price.$115
-garrett airesearch t3 .42/.48 AR , i know its a little small but for 12psi and $150 i cant go wrong
-oil feed kit $40 (with psi reducer)
-oil drain parts $40 (fuck oil pan taps are expensive)

sold my supercharger for 450
so i bought all this and have a little bit left for trouble shooting

manchuk · « **Reply #32 on:** October 13, 2010, 03:22:38 PM »

thanks for the input romkasponka, i was actually going to use those 2 points for water cooling the turbo i was looking at but, after getting the deal that i did on the turbo without water cooling im going to switch it over to the x-flow set up

manchuk · « **Reply #33 on:** October 13, 2010, 03:42:36 PM »

my friend is going to portugal for the winter, where i had car stored and was being worked on..
so i decided to bring the girlfreind home so i can work on it

manchuk · « **Reply #34 on:** October 13, 2010, 03:45:20 PM »

raped the front end so i can put truck bed liner in the engine compartment

it looks like the windshield is cracked but its just a reflection

manchuk · « **Reply #35 on:** October 13, 2010, 03:47:22 PM »

new fenders

the old one wher rotten about a foot up from the rockers

manchuk · « **Reply #36 on:** October 13, 2010, 03:51:35 PM »

home made engine hoist

it works good, i have 2 8" legs going thrue the floor joice's
put it all together for about $30 at princess auto (thats with the 1/2 ton come along)

manchuk · « **Reply #37 on:** October 13, 2010, 03:54:54 PM »

a picture of what my manifold should look like

manchuk · « **Reply #38 on:** October 13, 2010, 03:56:01 PM »

the turbo i bought for $150

manchuk · « **Reply #39 on:** October 13, 2010, 03:57:51 PM »

now all i need is to get a bit more cash and find the time to continue

mtle30 · « **Reply #40 on:** October 15, 2010, 12:12:11 PM »

Nice job! I hope someday I'll have the time and money to do this to my M42

Keep up the good work!

manchuk · « **Reply #41 on:** October 15, 2010, 10:14:22 PM »

well instead of waiting around for my turbo and manifold to come i decided to tinker with the shaved door kit i built, i got the driver side gutted and solonoid installed today

manchuk · « **Reply #42 on:** October 15, 2010, 10:16:11 PM »

the popper work great and are instantanious!!!!!!
heres a pic of the interior releases

manchuk · « **Reply #43 on:** October 15, 2010, 10:20:37 PM »

poor girl needs a good scrub on the inside
shes bin sitting for 5 years

manchuk · « **Reply #44 on:** October 16, 2010, 09:01:46 PM »

parts didnt show up again today so i decided to keep going on the cosmetics so i finished installing the remote kit for the shaved doors and while i had the kicks torn apart i switched the front speaker

i was actually surprized that 6 1/2 fit in there without any cutting