« previous next »
Pages: [1]   Go Down

Author Topic: coolant leak  (Read 2156 times)

freek454

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 1
    • View Profile
coolant leak
« on: April 11, 2010, 12:21:05 PM »
I have an m42 with a coolant leak rear engine driver side heater hose that connects to the head. I took off the hose and found the outlet tube was corroded and may need to be replaced. Is the outlet tube bolted on, or a piece of the head? Can I fix this problem without removing the head? :confused:
Logged

DesktopDave

  • Administrator
  • Legendary
  • *****
  • Thank You
  • -Receive: 60
  • Posts: 5076
  • Lives in the 80s
    • View Profile
    • The Iconic BMW
coolant leak
« Reply #1 on: April 11, 2010, 02:52:51 PM »
I think it's separate, but a press-fit bit of tubing.  I'd be tempted to JB Weld a pipe in there if it's really bad.
Logged
'08 Karmesinrot 128i 6MT
'86 Zinnoberrot 635CSi (M30B32/G265/3.46 torsen LSD)

Sold: '97 Montrealblau 318iS, '91 Brilliantrot 318i, '91 Brilliantrot 318iS

Phreon

  • Newbie
  • *
  • Thank You
  • -Receive: 1
  • Posts: 42
    • View Profile
coolant leak
« Reply #2 on: April 11, 2010, 03:25:49 PM »
You could buy a NPT pipe tap for a couple of dollars and screw a fitting or pipe nipple in there.
Logged
Pages: [1]   Go Up
« previous next »