Author Topic: bin file with eprom reader (Read 6091 times)

persianbmw · « **on:** January 30, 2010, 12:46:31 PM »

anyone have a detailed write up on how to pull the bin file off a chip with an eprom reader

DesktopDave · « **Reply #1 on:** January 30, 2010, 04:43:06 PM »

I was thinking about setting one up, but my budget got slashed. I'll post if I get anything.

Editing will be the bigger problem, I suspect.

persianbmw · « **Reply #2 on:** January 30, 2010, 11:05:37 PM »

i dont really need to edit i just have to find a idiot proof way of pulling the file and sending it to a tuner so theyll write me a chip since my dme isnt currently supported and i need it asap.

DesktopDave · « **Reply #3 on:** January 31, 2010, 09:37:07 AM »

Finding someone with an EEPROM chip reader would be difficult. I'm thinking a lot of coders should have one. Find an LS1 guy maybe?

persianbmw · « **Reply #4 on:** January 31, 2010, 06:56:47 PM »

i dont need help finding the reader i need a faq on how to get the files i need off my chip using the reader.

ecuconnections · « **Reply #5 on:** January 31, 2010, 09:26:12 PM »

I take it you got the eprom reader I suggested ?

persianbmw · « **Reply #6 on:** February 01, 2010, 11:08:06 AM »

not yet i wanted to make sure i would be able to use it before i buy it. id dont want to dick around with my ecu till im 100% on what im doing.

on a side note bears do you know if i can just pop in another 318i ecu which is more common? or is the engine mated to the ecu so as to not allow that.

DesktopDave · « **Reply #7 on:** February 01, 2010, 12:31:58 PM »

Do you have an e36? You can't easily swap a DME/ECU unless you get a dealer (or coder) to realign it to the car. No such trouble on the e30.

persianbmw · « **Reply #8 on:** February 01, 2010, 03:43:06 PM »

yeah im e36 93 engines a 94

persianbmw · « **Reply #9 on:** February 06, 2010, 08:35:56 PM »

anyone? diy on bin extraction

nickmpower · « **Reply #10 on:** February 06, 2010, 08:53:57 PM »

use tunerpro

ecuconnections · « **Reply #11 on:** February 07, 2010, 11:51:56 AM »

Quote from: persianbmw;86832

anyone? diy on bin extraction

My friend what hardware are you using to extract the bin file??