« previous next »
Pages: [1]   Go Down

Author Topic: Washer Pump Power  (Read 2969 times)

Slowered318

  • Full Member
  • ***
  • Thank You
  • -Receive: 9
  • Posts: 222
    • View Profile
    • My '91 318is
Washer Pump Power
« on: April 11, 2014, 12:09:26 AM »
Can someone with a multimeter do me a huge favor?

I'm getting 12 volts on both the purple/black and brown/black wires at the washer pump, it doesn't seem right but it could be normal? In the middle or replacing all the headlight wires from the fuse box forward, I want to know if I have shorted something out in the process.

Logged

DesktopDave

  • Administrator
  • Legendary
  • *****
  • Thank You
  • -Receive: 60
  • Posts: 5076
  • Lives in the 80s
    • View Profile
    • The Iconic BMW
Re: Washer Pump Power
« Reply #1 on: April 11, 2014, 10:19:55 AM »
If it stops raining I'll put a DMM on mine.

Looking at the ETM, I'd bet 12VDC on both sides means a damaged wiper control relay. But that wiring is a bit odd, like a lot of E30 systems. Did you try jumping the pump directly?
Logged
'08 Karmesinrot 128i 6MT
'86 Zinnoberrot 635CSi (M30B32/G265/3.46 torsen LSD)

Sold: '97 Montrealblau 318iS, '91 Brilliantrot 318i, '91 Brilliantrot 318iS

Slowered318

  • Full Member
  • ***
  • Thank You
  • -Receive: 9
  • Posts: 222
    • View Profile
    • My '91 318is
Re: Washer Pump Power
« Reply #2 on: April 11, 2014, 12:40:56 PM »
I haven't hooked up the pump or put any load on that wire yet, don't want to damage the relay. The fact this circuit has a 30 amp fuse and 18 or 20 gauge wire already concerns me a bit

When I discovered this I immediately cursed and ran for the battery terminal. lol
« Last Edit: April 11, 2014, 12:46:35 PM by Slowered318 »
Logged
Pages: [1]   Go Up
« previous next »