« previous next »
Pages: 1 ... 3 4 [5] 6   Go Down

Author Topic: And so it begins... (another M42 build)  (Read 34856 times)

bwawuz02

  • Full Member
  • ***
  • Thank You
  • -Receive: 1
  • Posts: 173
    • View Profile
And so it begins... (another M42 build)
« Reply #60 on: January 02, 2012, 11:18:28 AM »
Quote from: Warsteiner;107774
Those are exactly the inj's you DON'T want to get!! Those are the 155 body type that had the leakage issue.  You want the 150 style I posted earlier. 0 280 150 947 they should flow about 260cc where the 715's flow 256cc.


Taking Ralph's advice and not wanting to use old-style injectors, I ended up ordering some of the new Design 4 injectors. The guy who sells these carries a strong rep with the LS1 crowd and said that 24lb/hr should be plenty for 200hp. The injectors are 60mm from o-ring to o-ring and should be a direct swap. These are supposed to not have the leaking problem that the Design 3s do. They were $160 shipped with the EV1 adpaters to make these plug and play with the stock harness :)

http://fuelinjectorconnection.com/shop/index.php?_a=viewProd&productId=206
« Last Edit: January 02, 2012, 11:22:01 AM by bwawuz02 »
Logged

bwawuz02

  • Full Member
  • ***
  • Thank You
  • -Receive: 1
  • Posts: 173
    • View Profile
And so it begins... (another M42 build)
« Reply #61 on: January 09, 2012, 11:44:19 AM »
took a little trip today :)


Logged

bbarnumboy

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 210
    • View Profile
And so it begins... (another M42 build)
« Reply #62 on: January 09, 2012, 03:05:26 PM »
That is incredible. I wish i had bought a set when i was thinking of going ITBS.
Logged
1993 318is SC Twin Screw supercharger build in progress.

http://m42club.com/forums/showthread.php?t=14314

dude8383

  • Administrator
  • Legendary
  • *****
  • Thank You
  • -Receive: 1
  • Posts: 2049
    • View Profile
And so it begins... (another M42 build)
« Reply #63 on: January 09, 2012, 09:41:23 PM »
Drool!!!!
Logged

bwawuz02

  • Full Member
  • ***
  • Thank You
  • -Receive: 1
  • Posts: 173
    • View Profile
And so it begins... (another M42 build)
« Reply #64 on: January 10, 2012, 02:21:41 AM »
Yes drool, I sat in my room inspecting them for about an hour, lol; very nice quality on everything. I honestly had a hard time deciding to bite the bullet on these considering S50B30 ITBs can be had with plenum for half the price, but I'm glad I got these instead. I honestly don't have the time to retrofit the S50s and these are truly plug n play.

With the current exchange rate and uncle sam's VAT free form, I walked out with these for $1550 US :)
« Last Edit: January 10, 2012, 02:25:10 AM by bwawuz02 »
Logged

MikeDE

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 107
    • View Profile
And so it begins... (another M42 build)
« Reply #65 on: January 10, 2012, 01:59:41 PM »
Damn you dude...and Happy New Year.  

 If you want we can test them out on my M42:D.
Logged

bwawuz02

  • Full Member
  • ***
  • Thank You
  • -Receive: 1
  • Posts: 173
    • View Profile
And so it begins... (another M42 build)
« Reply #66 on: January 11, 2012, 12:06:53 AM »
Quote from: MikeDE;109551
Damn you dude...and Happy New Year.  

 If you want we can test them out on my M42:D.

I would love to, but I would hate to run your engine too lean and possibly do damage (i think it was deekay who said his was running lean on 21lb/hr injectors); not to mention the sadness of having to take them back out and ruin your fun :)

working with a guy from 318ti.org to help keep the ITBs clean: http://www.318ti.org/forum/showthread.php?t=32174

« Last Edit: January 11, 2012, 12:17:07 AM by bwawuz02 »
Logged

MikeDE

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 107
    • View Profile
And so it begins... (another M42 build)
« Reply #67 on: January 11, 2012, 04:15:06 AM »
Quote from: bwawuz02;109563
I would love to, but I would hate to run your engine too lean and possibly do damage (i think it was deekay who said his was running lean on 21lb/hr injectors); not to mention the sadness of having to take them back out and ruin your fun :)

working with a guy from 318ti.org to help keep the ITBs clean: http://www.318ti.org/forum/showthread.php?t=32174



Yeah, I need a catchcan too. My int mani was pretty oily for it being only 4mos since I did the motor.
Logged

bwawuz02

  • Full Member
  • ***
  • Thank You
  • -Receive: 1
  • Posts: 173
    • View Profile
And so it begins... (another M42 build)
« Reply #68 on: January 12, 2012, 04:44:29 PM »
Quote from: MikeDE;109566
Yeah, I need a catchcan too. My int mani was pretty oily for it being only 4mos since I did the motor.

I highly recommend you contact the guy in the link I posted, he does great work and his customer service is out of this world. I know it's just a catch can, but i like knowing that my build is unique so that totally makes it worth a little extra scratch. If you do decide to get one from him, do it soon so he can send it to my APO for cheaper shipping and you can pick it up from me; I'm only here until the end of March :)
Logged

bwawuz02

  • Full Member
  • ***
  • Thank You
  • -Receive: 1
  • Posts: 173
    • View Profile
And so it begins... (another M42 build)
« Reply #69 on: February 12, 2012, 07:48:34 PM »
my finished catch can :)
i'm going to use this to mount it: http://www.jegs.com/i/JEGS+Performance+Products/555/150040/10002/-1


Logged

bwawuz02

  • Full Member
  • ***
  • Thank You
  • -Receive: 1
  • Posts: 173
    • View Profile
And so it begins... (another M42 build)
« Reply #70 on: February 20, 2012, 02:15:12 AM »
moates emulator ordered, KnockLink G4/LC-1/Midnight Tuning XDF delivered. DIY tuning, here I come!!!
My build started with a 5/95 build E36 M42 that came w/knock sensors. I'll be using the stock knock sensor setup to feed signal to the knocklink :)

YouTube Vids
KnockLink G4
KnockBlock G4: shows KnockLink in action
Logged

bwawuz02

  • Full Member
  • ***
  • Thank You
  • -Receive: 1
  • Posts: 173
    • View Profile
And so it begins... (another M42 build)
« Reply #71 on: February 22, 2012, 07:22:11 AM »
Some lite reading before I start to pretend that I actually know what I'm doing :)
Logged

DesktopDave

  • Administrator
  • Legendary
  • *****
  • Thank You
  • -Receive: 60
  • Posts: 5076
  • Lives in the 80s
    • View Profile
    • The Iconic BMW
And so it begins... (another M42 build)
« Reply #72 on: February 22, 2012, 08:30:35 AM »
That's quite the read.  Your build gets more epic every time I check in.

Thanks for posting all this information.
Logged
'08 Karmesinrot 128i 6MT
'86 Zinnoberrot 635CSi (M30B32/G265/3.46 torsen LSD)

Sold: '97 Montrealblau 318iS, '91 Brilliantrot 318i, '91 Brilliantrot 318iS

d.hitchcock

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 137
    • View Profile
And so it begins... (another M42 build)
« Reply #73 on: February 22, 2012, 09:38:11 AM »
Love it!

You are doing some awesome work.

Cheers,
d.hitchcock
Logged
SHAZAM, GOMER, LOOK AHEAD!

bwawuz02

  • Full Member
  • ***
  • Thank You
  • -Receive: 1
  • Posts: 173
    • View Profile
And so it begins... (another M42 build)
« Reply #74 on: February 22, 2012, 10:31:42 AM »
Quote from: d.hitchcock;110483
Love it!

You are doing some awesome work.

Cheers,
d.hitchcock

Thanks! When the key turns and the engine starts w/o puking anything out I'll gladly accept that compliment. This is the best erector set EVER!!!
Logged
Pages: 1 ... 3 4 [5] 6   Go Up
« previous next »