Author Topic: Single wiper conversion (Read 6600 times)

carlos318is · « **on:** October 04, 2009, 05:43:29 AM »

Has anyone ever done this on the cheep buy using the stock wiper mech and stock motor :confused:

Selfish · « **Reply #1 on:** October 04, 2009, 09:31:35 PM »

I haven�t done it yet, Carlos, but some guys have. Take a look at this thread on r3v:

http://www.r3vlimited.com/board/showthread.php?t=79322&highlight=fab+mono+wiper

carlos318is · « **Reply #2 on:** October 05, 2009, 05:17:11 PM »

We seem to have a diffrent wiper mech in the uk but this is what I have done so far

Selfish · « **Reply #3 on:** October 06, 2009, 12:11:26 AM »

From your picture, I�m assuming you cut the assembly to remove it from the car so you could work on it, right, mate?

carlos318is · « **Reply #4 on:** October 07, 2009, 02:30:06 PM »

No all I have done is to cut the ( UK drivers side ) wiper spline off and the rod that connects the 2 splines together so all I will be using is the center spline