Author Topic: E36 M42 Turbo install questions. (Read 11786 times)

1991 E30 M42 · « **Reply #16 on:** September 15, 2009, 09:36:41 PM »

http://www.classicinlines.com/CFMcalc.asp

Windsma · « **Reply #17 on:** September 15, 2009, 10:00:18 PM »

Windsma · « **Reply #18 on:** September 15, 2009, 10:15:22 PM »

1991 E30 M42 · « **Reply #19 on:** September 15, 2009, 10:35:35 PM »

80% VE sounds a bit high for a worn out engine

Windsma · « **Reply #20 on:** September 15, 2009, 10:57:29 PM »

bwawuz02 · « **Reply #21 on:** October 17, 2009, 08:47:51 PM »

Quote from: Windsma;78481

as the Join Date states, ive been "reading" M42club threads since June w/ no real answers.

GTFO! you can learn a lot from reading, more than enough to complete your project. there are many bmw forums to learn from besides this one. You're not going to learn jack by insulting people who have already completed your project, that's for sure

fazerfreak · « **Reply #22 on:** October 19, 2009, 01:56:39 AM »

Quote from: Windsma;78471

How would i upgrade the injectors?
Get bigger one, 300cc++
How will the Idle air system work?
should work fine, lots of norwegian builds have it on.
Should i change over to the E30 Intake Manifold?
dont know, but why ??
Dual mass clutch or convert to Single ?
depends on whp you want out of it.

Practical Daily driver?
no probs here, but then again how your tuning it..
keep the pressure between 0,5-0,8 you�ll have a nice funny car

sorry cant tell you what turbo to use.. i�m not that in to mechanics
but i use in my car:
ebay turbokit. AR 50/63
injectors 4x 300cc @3,6bar
turbo @1,3bar
sparks @ 0,6mm
chip with retarded egnition..

something nice info here as well:
http://www.daham.org/16vt/projects/e30_318ist/

Windsma · « **Reply #23 on:** October 19, 2009, 05:14:32 PM »

xwill112x · « **Reply #24 on:** October 19, 2009, 07:04:23 PM »

any one bitching/ pusy fighting needs to GTFO of m42club, that mess is for r3v and e30tech..not here.

Blip Bavarian · « **Reply #25 on:** October 29, 2009, 11:15:41 AM »

Quote from: fazerfreak;80106

something nice info here as well:
http://www.daham.org/16vt/projects/e30_318ist/

Wow, that looks to be a pretty gnarly build:eek:. Was the car ever completed? any more info.

Sorry, dont mean to thread jack. Any progress?

Windsma · « **Reply #26 on:** October 31, 2009, 12:50:23 PM »

Pull the dick out of your ass and learn how to keep a member.

quinn11m20 · « **Reply #27 on:** October 31, 2009, 02:55:16 PM »

Wow! after reading this post, I feel bad about writing the one I wrote.

Eric Happy Meal · « **Reply #28 on:** November 06, 2009, 02:31:04 AM »

Quote from: Windsma;78474

Asshole

Ive done plenty of reading.
Answer the GodDamn Question or GTFO

If it sooo easy to find/read, why cant someone put them in a "Turbo Info" sticky?

If i can build this, I think i can figure out your pussy 4cyl.

your an idiot. IFF "you can buld this" then you wouldnt need to be asking a pussy 4cyl online forum for advice. GTFO please.

Windsma · « **Reply #29 on:** December 04, 2009, 06:07:10 PM »

You're right which is why i ditched this project
to TwinTurbo a Mopar 499ci. Dart

I didnt want to be in the same "lower" class as you assholes. Thx for the help, I dont know what i was thinking.