« previous next »
Pages: [1]   Go Down

Author Topic: Swapping M44 (1998) into an e30 (M40)  (Read 5227 times)

oomesh

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 17
    • View Profile
Swapping M44 (1998) into an e30 (M40)
« on: September 13, 2009, 02:38:15 PM »
I would really appreciate if someone could help. I recently ordered a second hand m42 from a 1995 e36. But unfortunately, only an m44 from 1998 ti is available (complete engine with wiring and ecu). do you think this swap is possible for my e30 with current m40 engine? i've read that sensors are different, and i should cater for ignition bearings,...?
WHATS THE DIFFERENCE BET M42 and M44?
Kindly advice me.
Logged

JoeDellio

  • Sr. Member
  • ****
  • Thank You
  • -Receive: 0
  • Posts: 266
    • View Profile
Swapping M44 (1998) into an e30 (M40)
« Reply #1 on: September 13, 2009, 05:56:42 PM »
Go m42 all the way. Its a .1 liter difference and Ive read the m42's are stronger internally than the m44, plus the m44 is OBD2, which is never fun.
Logged
[SIGPIC][/SIGPIC]1995 318i

oomesh

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 17
    • View Profile
Swapping M44 (1998) into an e30 (M40)
« Reply #2 on: September 14, 2009, 12:23:05 AM »
Quote from: JoeDellio;78393
Go m42 all the way. Its a .1 liter difference and Ive read the m42's are stronger internally than the m44, plus the m44 is OBD2, which is never fun.


Thanks for advice. i would like to know what is the difference bet obd1 and obd2. does involve loads of changes in my e30?:confused:
Logged

1991 E30 M42

  • Hero Member
  • *****
  • Thank You
  • -Receive: 0
  • Posts: 835
    • View Profile
Swapping M44 (1998) into an e30 (M40)
« Reply #3 on: September 14, 2009, 12:36:32 AM »
if you go m44, engine wiring harness, ecu, possibly bcm, body wiring harness, etc... it could get very messy

if you go m42, engine wiring harness, ecu and possibly a few small things

With both of these I'm talking only of the electrical bits, not the mechanical bits as it would be the same for both, engine (duh), tranny?, exhaust, engine mounts?, steering bits?, I have never done an m42 swap into an m40 car (I think living in the US could have something to do with this) but there are a few people on here that have.
Logged

tony92ic

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 148
    • View Profile
Swapping M44 (1998) into an e30 (M40)
« Reply #4 on: September 16, 2009, 09:46:13 PM »
oomesh doesn't have his location listed, but given that he has an M40 in his e30 would it be fair to guess he is not in the US. Since OBDII is a US mandate and the European Union didn't adopt its version (EOBD) until 2001 maybe all the electrical hoo ha that plagues US swaps doesn't apply to him.
Logged
Tony

92 e30 318ic - Why I am here
72 2002tii - Much modified
04 X3 3.0is - Kid hauler, winter beater, tow vehicle
95 M42 - Looking for a home. Hennarot e21 maybe?
91 M42 - Am I a hoarder?

ose30

  • Sr. Member
  • ****
  • Thank You
  • -Receive: 0
  • Posts: 346
    • View Profile
Swapping M44 (1998) into an e30 (M40)
« Reply #5 on: September 17, 2009, 01:06:49 AM »
Quote
European Union didn't adopt its version (EOBD) until 2001 maybe all the electrical hoo ha that plagues US swaps doesn't apply to him.

Most cars in EU have had OBD from early '90's.
Logged

oomesh

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 17
    • View Profile
Swapping M44 (1998) into an e30 (M40)
« Reply #6 on: September 17, 2009, 04:17:17 AM »
Quote from: tony92ic;78555
oomesh doesn't have his location listed, but given that he has an M40 in his e30 would it be fair to guess he is not in the US. Since OBDII is a US mandate and the European Union didn't adopt its version (EOBD) until 2001 maybe all the electrical hoo ha that plagues US swaps doesn't apply to him.


I am Mauritius and we have euro bimmers here. Unfortunately the engine that i'm acquiring has the obd2. and my mechanic said that the transformation is huge.

I really appreciate your help from you all. I really wanna do the swap and need your help. cheers
Logged

oomesh

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 17
    • View Profile
Swapping M44 (1998) into an e30 (M40)
« Reply #7 on: September 18, 2009, 02:08:18 AM »
Logged
Pages: [1]   Go Up
« previous next »