The Ultimate COP FS Thread

[seph429]

It will go out tomorrow morning.

just curious if you guys are going to make any more kits after this.

[rob_e30]

We will.  I have the plates and hardware for 4 more kits and will get coils on order tomorrow.  I will take deposits for the next 4.

[Matt-B]

got it looks nice.....

thanks rob, ill start tis tomorrow maybe

new valve cover getting cleaned first

[wazzu70]

How much do you want for the kits?

Thanks.

[rob_e30]

How much do you want for the kits?

Thanks.

It's in the first post of the thread...

How do I get one?
We accept Paypal and ship via 2-3 day Priority mail. The price is $190 within the US or $225 USD for International destinations. Most orders ship the next business day. PM me for specific ordering instructions and availability

[3bvert]

sent a pm, if you still have kits, have not heard back yet, am intrested

[HATER-PROOF]

Rob-have you received the check yet?

[rob_e30]

sent a pm, if you still have kits, have not heard back yet, am intrested

I was out of town on business today, but your PM has been answered.

I have not received the check, Hater Proof.

[3bvert]

thanks, paypal sent

[rob_e30]

One kit in the current run left.

[sfv_rider]

I'll take the last set.

Rob, please PM with your Paypal info.

[Matt-B]

installed and looking great, here are pics for you to help advertise

[3bvert]

just got mine in today....my thoughts, ...well worth it in my car...thanks...

been fighting a slight miss  during hard acceleration for a few months,
installed coils, wires, no difference ( swapped from my parts car)

installed cop kit, did not notice a difference at idle, but sure did under heavy acceleration

my combo, 4 point injectors, chipped, throttle heater crap gone, K&N in stock box ( came with car)  delete fan a/c &p/s.., 2 1/2 exsaust and magnaflow......now wiht this cop kit, pulls great

install, note for me anyway, the wires go in a lot easier with the "top" ( intake side) bolts out, wires clip right in, install all bolts to align, tighten bottoms,  then remove  uppers , plug in wires,  re-install  the tops bolts
takes a whole extra 15 seconds, but like I said , made attaching wires a lot easier

spent a few more minutes and ground off the rivits that hold the old coil brackets  to the body, so now those are gone


hey matt, looks good, but mine looks prettier    

[Matt-B]

pics of yours?


im not done yet

mine is temp....

[Cobra Jet]

just got mine in today....my thoughts, ...well worth it in my car...thanks...

been fighting a slight miss  during hard acceleration for a few months,
installed coils, wires, no difference ( swapped from my parts car)

installed cop kit, did not notice a difference at idle, but sure did under heavy acceleration

my combo, 4 point injectors, chipped, throttle heater crap gone, K&N in stock box ( came with car)  delete fan a/c &p/s.., 2 1/2 exsaust and magnaflow......now wiht this cop kit, pulls great

install, note for me anyway, the wires go in a lot easier with the "top" ( intake side) bolts out, wires clip right in, install all bolts to align, tighten bottoms,  then remove  uppers , plug in wires,  re-install  the tops bolts
takes a whole extra 15 seconds, but like I said , made attaching wires a lot easier

spent a few more minutes and ground off the rivits that hold the old coil brackets  to the body, so now those are gone


hey matt, looks good, but mine looks prettier    

can ya post up some pics?  sounds like I'm needing to get on this COP conversion when I get some extra moola....