Author Topic: How to change the reverse light switch on a 91 BMW 318is (Read 9238 times)

Flipfury · « **on:** July 04, 2009, 07:12:54 AM »

Okay first of all you will need a reverse light switch which you can get for around 12 dollars. Once you have it jack up the car on the drivers side and crawl under a little more than halfway its on the driverside of the tranny up real high.
you will see 2 wires hooked to it. just get a firm grip on the end of the wires and unhook them one by one. Take a wrench and take it off and replace everything back. easy easy lemon squeezy. No mechanics needed!

thebutcher37 · « **Reply #1 on:** July 09, 2009, 08:26:02 PM »

I need to do this.... i hope this is why I dont have reverse lights... its sooooo eazy I keep pushing it back.... procrastination!!!!:(

Thanks for the post though, sometimes people dont ask for help cause things "seem" so eazy they dont wanna look dumb, but this will help .. hopefully

bimmerscott · « **Reply #2 on:** February 11, 2010, 12:11:40 PM »

I think this is my first post here - kinda late to the party. I have to replace the reverse light switch on our '91 318is. Is there a seal ring? I bought the switch but didn't look in the box for a seal ring. What torque value for tightening?

Thanks,

Scott Miller

Quote from: Flipfury;74785

Okay first of all you will need a reverse light switch which you can get for around 12 dollars. Once you have it jack up the car on the drivers side and crawl under a little more than halfway its on the driverside of the tranny up real high.
you will see 2 wires hooked to it. just get a firm grip on the end of the wires and unhook them one by one. Take a wrench and take it off and replace everything back. easy easy lemon squeezy. No mechanics needed!

Chalino · « **Reply #3 on:** February 11, 2010, 12:55:55 PM »

Mine was on the passengers side and was missing the fuckin wires! I had to wire the switch back to the connection under the shifter and I had reverse lights. Sorry, had to chime in.

thebutcher37 · « **Reply #4 on:** February 11, 2010, 06:38:40 PM »

I never got back, but i replaced mine and i only hand tightened it with a box wrench. But i still have no lights..:confused:

Chalino · « **Reply #5 on:** February 11, 2010, 06:51:46 PM »

Quote from: thebutcher37;87268

I never got back, but i replaced mine and i only hand tightened it with a box wrench. But i still have no lights..:confused:

check the connection where the shifter is. Take out the shift boot and look for a white connector. Mine was just ripped off. This link helped me put:

http://forums.bimmerforums.com/forum/showthread.php?t=1359546