Author Topic: single pipe exhaust to dual pipe back box (Read 3132 times)

M42_Jester · « **on:** June 27, 2009, 08:35:27 PM »

has anyone tried this conversion?

i'm looking at a dual pipe back box from Eisenmann, but it looks to me like they would only fit a 6-cyl engine with 2 pipes coming from the exhaust manifold. is it possible, by using a Magnaflow Y-pipe, to go from a single pipe off the exhaust manifold, to a dual pipe back box?

here is what i'm looking at:

with the Magnaflow Y-pipe:

is it at all possible?

xwill112x · « **Reply #1 on:** June 27, 2009, 10:42:31 PM »

xsjado · « **Reply #2 on:** June 28, 2009, 12:14:46 AM »

bye bye spare wheel well....

M42_Jester · « **Reply #3 on:** June 28, 2009, 07:53:20 AM »

wat if it went around the spare wheel well? i'm sure it can be configured so that the pipe splits before the wheel well and goes around it

B318M42W · « **Reply #4 on:** June 28, 2009, 11:19:50 PM »

why not just split the line and then add a second resonator??? like doubling the line where the stock one leaves the centre line of the car, and make it go arround the spare wheel both ways??

M42_Jester · « **Reply #5 on:** June 29, 2009, 08:11:26 PM »

they do have this system that i have been looking at that goes around the wheel well

probably the better option the go for