Author Topic: Radiator air bleeder screw (Read 3117 times)

Mbryce42 · « **on:** April 20, 2009, 03:43:47 PM »

I was bleeding the air out of my radiator and tightened the bolt next to the radiator cap to much and broke the thread off in the hole. I got the thread out but have no idea where to get the bolt. I tried lowes but didnt have any plastic bolts that fit. I am still going to try napa or advancce but does any one know where to find one.

xwill112x · « **Reply #1 on:** April 20, 2009, 03:59:00 PM »

junk yards, dealership maybe?

Wizard · « **Reply #2 on:** April 20, 2009, 07:53:07 PM »

Dealer should have one...Part # is 17111712788

carlos318is · « **Reply #3 on:** April 21, 2009, 03:24:16 PM »

In the uk BMW charge �2.00 so about $4 dollars

Isamemon · « **Reply #4 on:** April 21, 2009, 07:34:56 PM »

it is a special slotted screw, the slot is to allow that air/water to pass without removing screw

if you remove the screw you could loose the o-ring, I know I have

they are cheap at pelican parts, I ordered two , one to replace and one spare, just in case

Mbryce42 · « **Reply #5 on:** April 23, 2009, 03:54:46 PM »

Thank You