Head Replacement tools DIY

[dave45056]

OK, so I have access to a machine shop and I'm an engineer (no not a Chem e, but a mechaical).  Anyway I made some drawings to make the tools to do a HG repaair or head remove/replace.  I found another guy in the same boat (I mean, access to machine shop) so I posted the drawings.
Thought some of you in here might like to use them to save some $$.

Here is the link:
http://www.318ti.org/forum/showthread.php?t=11334

Now this is a real diy, huh?