Author Topic: Bumper Removal Torx Size (Read 5267 times)

rufiox426 · « **on:** January 22, 2009, 01:33:26 PM »

Does anyone know what size TORX to remove a 1992 318ic front bumper?

dsm2002 · « **Reply #1 on:** January 22, 2009, 04:03:28 PM »

T55 iirc

Rafiki · « **Reply #2 on:** February 15, 2009, 11:41:32 PM »

did this today! t55! wooo

dude8383 · « **Reply #3 on:** February 16, 2009, 05:38:35 PM »

sucks when they're so rusty and won't budge! i've already snapped two t-55 bits

Rafiki · « **Reply #4 on:** February 17, 2009, 11:40:43 PM »

damn. I ended up swapping them with 2 10mm hex bolts that came from my 325

Zilla · « **Reply #5 on:** February 18, 2009, 10:41:07 PM »

yea i snapped one when I working on my bumper, not a very good feeling!

manydubs · « **Reply #6 on:** March 09, 2009, 10:17:18 AM »

I stripped out the bolt head trying to remove on of mine.

Going to have to get creative with the 3 smaller torx bolts on the front of bumper support...

carlos318is · « **Reply #7 on:** March 10, 2009, 06:16:22 AM »

You can also remove them with a big Allen key but not to sure of the size

manydubs · « **Reply #8 on:** March 10, 2009, 07:23:03 AM »

That is if they in fact have a allen head.

Have to drill mine out...

carlos318is · « **Reply #9 on:** March 10, 2009, 10:14:05 AM »

They don't have a Allen head they are t55 but a Allen key will fit and is tougher than a t55

manydubs · « **Reply #10 on:** March 12, 2009, 10:37:37 AM »

Dremel tool and large drill bit works too.