Author Topic: m40 - m42 swap question (Read 2339 times)

corsair · « **on:** January 02, 2009, 11:56:41 PM »

recently destroyed the bottom end of my m40, rather than paying for the same engine to go back was looking at dropping in an m42.

what parts other parts etc need to be changed for this to happen? gearbox, ecu etc. is this even a viable option.

thanks in advance
-Corsair

xwill112x · « **Reply #1 on:** January 03, 2009, 01:40:09 PM »

is it a viable question?
depends what your looking for really.
power-drop a m20.

reliable, yet fun-m42.

corsair · « **Reply #2 on:** January 03, 2009, 09:52:03 PM »

I'm not so much looking for power but just wanting something a little bit quicker.

the only thing holding me back from doing the conversion is that im not sure if i will need new trans also...

///M3Mike · « **Reply #3 on:** January 04, 2009, 10:54:31 AM »

wanna sell your M40 flywheel?

Froos · « **Reply #4 on:** January 04, 2009, 12:47:05 PM »

Corsair where are you located? Basically its a very easy swap, gearbox is the same, you need stuff like wiring and ecu..

Author Topic: m40 - m42 swap question (Read 2339 times)

///M3Mike