Author Topic: Concerned? (Read 3321 times)

xwill112x · « **on:** June 18, 2008, 08:57:57 PM »

ok..my m42 has around 135k on it (odometer quit on me at 122952)
but anyways..
you can hear the "ticking" of the lifters pretty well, i'm getting to where im scared to whine it out in the lower gears.
i can't really afford a rebuild (16 yr old budget)

is my motor just waiting to blow?:confused::confused::confused:

help!

kowalski · « **Reply #1 on:** June 18, 2008, 09:48:32 PM »

if its just the lifters its not a huge deal. run a detergent through on your next oil change (you add it just before doing the change, run the motor until its warm, and then drain the oil.)

then get some elf or mobile one or another high end synthetic oil and run that.

I had the same problem and this fixed it, its been about 3 years. I still occasionally get it, but its mostly gone.

xwill112x · « **Reply #2 on:** June 18, 2008, 09:55:53 PM »

like tide?
sry for the dumb questions..

ScreamerBeemer · « **Reply #3 on:** June 18, 2008, 10:16:17 PM »

He ment an oil adidtive like what you would find at a parts store.

xwill112x · « **Reply #4 on:** June 18, 2008, 10:29:59 PM »

so the ticking isnt anything bad?

and runnining it hard shouldnt be a worry?

peerless · « **Reply #5 on:** June 18, 2008, 10:30:57 PM »

Quote from: xwill112x;51557

like tide?
sry for the dumb questions..

LOL!

As mentioned they make a oil additive that has detergents in it to clean the inside of the engine.

An old school trick that I have seen work really well is to drain about a qt of oil and add a quart of Diesel fuel. Do not drive or rev the engine just let it sit at a fast idle until at full operating temperature, about 10-20 minutes. Then drain the oil and run a high quality oil.

kowalski · « **Reply #6 on:** June 19, 2008, 12:32:05 AM »

or you could just run diesel oil, it has many more detergents in it the regular oil. just make sure to get the non foaming stuff.

But yes, i was referring to an oil detergent. for the 5$ more i would run something reputable rather then using diesel fuel though. I'm sure works fine, but its better safe then sorry.

eric16v · « **Reply #7 on:** June 19, 2008, 01:52:52 AM »

whats your guy's thoughts on running shell rottela- t full syn. 5-40. ive got 265,xxx on my m42. i live in san francisco bay area where its anywhere from 80 to 95 degrees. or you recomend 20-50. synthetic or dino?

batsbats · « **Reply #8 on:** June 19, 2008, 11:08:30 AM »

Quote from: xwill112x;51557

like tide?
sry for the dumb questions..

Oh my ...... I'm dying in laughter here

batsbats · « **Reply #9 on:** June 19, 2008, 11:10:37 AM »

Quote from: eric16v;51572

whats your guy's thoughts on running shell rottela- t full syn. 5-40. ive got 265,xxx on my m42. i live in san francisco bay area where its anywhere from 80 to 95 degrees. or you recomend 20-50. synthetic or dino?

I use Mobil1 15w-50. The m20 crowd likes using 20w-50, but I think it's too thick for the m42. I believe tjts uses rotella 5w-40. Their site states it's a good equivalent for 15w-40. I'm going to try it out on my next oil change.

xwill112x · « **Reply #10 on:** June 19, 2008, 06:43:51 PM »

ive always ran 20-50 in my car.

but idk, that ticking kinda worrys me though...