Author Topic: Hood Seal Kits Entwicklung Drei�ig Zen (Read 9214 times)

DCColegrove · « **on:** May 24, 2008, 02:31:46 PM »

Evo/DTM Type Hood Seal Kits Seal Kits

These were NLA for a while and I sourced some kits from China... Big Ass mistake at any price.

These are the original spec material and once again USA made.

Evolution Zen E30 HOOD SEALS are constructed in the USA from 100% High performance EPDM rubber. The seals fit between the hood and the fender. This seal completely covers / seals the space between the hood and the fender for better aerodynamics.

We have it made in small runs of specially formulated EDPM in order to suit the conditions IE heat, UV, oil resistance etc. the reason being was that the OE product would harden and cause hood closing issues and also the rubber would degenerate rapidly and the off the shelf products were just as bad.

Here are some larger images

dude8383 · « **Reply #1 on:** May 25, 2008, 11:12:53 AM »

Do you have any pics of the trunk seal?

DCColegrove · « **Reply #2 on:** May 25, 2008, 07:20:22 PM »

Quote from: dude8383;50032

Do you have any pics of the trunk seal?

Trunk Seal Kits NLA

DCColegrove · « **Reply #3 on:** June 29, 2008, 04:23:41 PM »

Currently NLA

DCColegrove · « **Reply #4 on:** August 15, 2008, 11:35:04 PM »

DCColegrove · « **Reply #5 on:** September 05, 2008, 05:57:37 PM »

Quote from: ijkl386;56106

offering baby for sale a joke, says father: An online ad offering a week-old baby for ...Buy RF Currency

Now... That's a weird response

DCColegrove · « **Reply #6 on:** March 05, 2009, 12:26:47 AM »

USA Made Hood Gap Seal Kits are Back in Stock and at a better price.

Available Here: BMW Evolution Zen Hood Seal Kits

JP 91iS · « **Reply #7 on:** March 05, 2009, 12:18:03 PM »

How much is the aerodynamics improved from seals like these?

DCColegrove · « **Reply #8 on:** March 06, 2009, 07:10:41 PM »

Quote from: JP 91iS;67731

How much is the aerodynamics improved from seals like these?

Honestly... Slightly... Very slightly.

It does clean up the turbulence in the air that slips off the sides of the hood (Difficult to explain)

At very high speeds it will reduce buffeting of the hood it's self (also difficult to explain)

Basically I would consider it cosmetic for a street driven car.

We have other stuff we will be reproducing in the works... Not available just yet.

Pitch-Black · « **Reply #9 on:** June 06, 2009, 02:17:06 PM »

How much would shipping to Europe(Belgium) be?