Author Topic: help with fireing order  (Read 2696 times)

250k318is

  • Jr. Member
  • **
  • Thank You
  • -Receive: 0
  • Posts: 55
    • View Profile
help with fireing order
« on: May 03, 2008, 07:27:36 PM »
i did a coil over plug swap and got carried away and didnt mark witch coil whent wiht what cylinder if some one could clear this up that would be great had the car running but it dies if ou let it idle so im at a loss fixed all seen vaccume leaks so i think its the firein order

nuvolarossa

  • Sr. Member
  • ****
  • Thank You
  • -Receive: 1
  • Posts: 468
    • View Profile
help with fireing order
« Reply #1 on: May 04, 2008, 01:49:44 AM »

250k318is

  • Jr. Member
  • **
  • Thank You
  • -Receive: 0
  • Posts: 55
    • View Profile
help with fireing order
« Reply #2 on: May 04, 2008, 12:13:35 PM »
they speak of a distributer cap i didnt think the m42 had oneif they do doint me in the direction of were its at

Cobra Jet

  • Hero Member
  • *****
  • Thank You
  • -Receive: 1
  • Posts: 633
    • View Profile
help with fireing order
« Reply #3 on: May 05, 2008, 09:25:54 AM »
no dizzy on an M42....

On a stock setup, the ignition wires go from the original coil packs right onto the tops of the spark plugs.
- Phil
1994 Cobra coupe #0013
2011 Genesis Coupe
2011 Tucson GLS

250k318is

  • Jr. Member
  • **
  • Thank You
  • -Receive: 0
  • Posts: 55
    • View Profile
help with fireing order
« Reply #4 on: May 05, 2008, 12:31:41 PM »
Thought So