Author Topic: How to remove intake manifold completely? (Read 2547 times)

Frankie · « **on:** March 09, 2008, 07:06:41 AM »

I have removed the upper part of the intake manifold and throttle body. I want to remove also the lower part in order to change the gasket.

Does anyone have any good instructons for removing the lower part?

It seems that I have to remove injectors and take the clutch cylinder hose out of the manifold?

What else should be take into account before proceeding?

RED IS 91 · « **Reply #1 on:** March 09, 2008, 07:50:15 AM »

Have you searched the online manual ?

http://www.m42club.com/forums/showthread.php?t=964

Frankie · « **Reply #2 on:** March 09, 2008, 08:15:54 AM »

Yes, I have. But the manual seems to skip few things, like that hose coming from brake sylinder??

Do I have to remove injectors for removing the lower part of the manifold?

swiss318is · « **Reply #3 on:** March 09, 2008, 09:37:30 AM »

to remove the lower part of the intake... there are 5 or so bolts...!!thats all.. no lines to remove.. no injectors to remove.. you have to look at it, its built very simple..