« previous next »
Pages: [1] 2   Go Down

Author Topic: Wheel bearing tool  (Read 6047 times)

sheepdog

  • Site Admin
  • Administrator
  • Legendary
  • *****
  • Thank You
  • -Receive: 4
  • Posts: 1272
    • View Profile
Wheel bearing tool
« on: February 26, 2008, 06:40:55 PM »
I need to do my bearings, and cannot locate the tool to borrow, so time to buy I guess.

Pelican wants $220 for the tool, no problem, but I will BE DAMNED if I will pay $50 to ship the thing ground and $155 to ship 3 day!


Anyone know of a cheaper route.
Logged
"When trouble arises and things look bad, there is always one individual who perceives a solution and is willing to take command. Very often, that individual is crazy." --Dave Berry

1991 E30 M42

  • Hero Member
  • *****
  • Thank You
  • -Receive: 0
  • Posts: 835
    • View Profile
Wheel bearing tool
« Reply #1 on: February 26, 2008, 06:56:26 PM »
If your trying to do the front hubs I made a tool for about $20 with things that can be purchased from your local Home Depot
Logged

sheepdog

  • Site Admin
  • Administrator
  • Legendary
  • *****
  • Thank You
  • -Receive: 4
  • Posts: 1272
    • View Profile
Wheel bearing tool
« Reply #2 on: February 26, 2008, 07:44:45 PM »
I need to do front and rear actually.
Logged
"When trouble arises and things look bad, there is always one individual who perceives a solution and is willing to take command. Very often, that individual is crazy." --Dave Berry

kowalski

  • El\' Duder
  • Administrator
  • Legendary
  • *****
  • Thank You
  • -Receive: 3
  • Posts: 1368
    • View Profile
Wheel bearing tool
« Reply #3 on: February 26, 2008, 07:53:05 PM »
pictures of tool? are you talking about a puller?
Logged
Sale:
EBC Green stuff pads = $60 shipped front and rear set available


Send $ to: kroeker.michael @ gmail.com

Fore Sale Thread

sheepdog

  • Site Admin
  • Administrator
  • Legendary
  • *****
  • Thank You
  • -Receive: 4
  • Posts: 1272
    • View Profile
Wheel bearing tool
« Reply #4 on: February 27, 2008, 12:17:14 PM »
There are 2 types,  one is arbors, the other does install and removal.
One is supposed to be good, the other junk (not sure which is which).

Left side and right side...
http://www.technictool.com/bmwtools.htm

Pelican wants $50 to ship the one on the left ground.
I found it for about $20 less total on Ebay.

Overpaying on shipping just burns me.
Logged
"When trouble arises and things look bad, there is always one individual who perceives a solution and is willing to take command. Very often, that individual is crazy." --Dave Berry

kowalski

  • El\' Duder
  • Administrator
  • Legendary
  • *****
  • Thank You
  • -Receive: 3
  • Posts: 1368
    • View Profile
Wheel bearing tool
« Reply #5 on: February 27, 2008, 12:54:20 PM »
have you checked local stores? perhaps even the dealership?
Logged
Sale:
EBC Green stuff pads = $60 shipped front and rear set available


Send $ to: kroeker.michael @ gmail.com

Fore Sale Thread

keflaman

  • Administrator
  • Hero Member
  • *****
  • Thank You
  • -Receive: 35
  • Posts: 929
    • View Profile
Poor Man Bearing Tools
« Reply #6 on: February 27, 2008, 04:18:08 PM »
You'll have to excuse the lack of pictures from me right now as my internet connections sucks and I can't download at the moment.

With the first four tool sets, misc sockets, washers, etc, I was able to remove and replace my rear and front wheel bearings. It wasn't necessarily pretty and the first rear bearing took me eight hours of trial and error. The second bearing took me about three hours.

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=8856
http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=46389
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=38335
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=93980

I've ordered this set as well, although I'm not sure if the sleeve ID is in there that I need for future jobs.

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=45210

Hopefully my internet connection will be repaired soon and I'll post pictures of my debacle.

Keith
« Last Edit: February 27, 2008, 04:21:44 PM by keflaman »
Logged

FredK

  • Jr. Member
  • **
  • Thank You
  • -Receive: 0
  • Posts: 86
    • View Profile
Wheel bearing tool
« Reply #7 on: February 27, 2008, 05:52:06 PM »
The Sir Tools B90 is heavy as heck!

Anyway, it makes bearing replacement take around an hour a side. A breeze, if you will.

EDIT: I borrowed mine from a local guy. I wish I had one to lend to a fellow 318is'er, but I don't! :(
Logged

Wizard

  • Sr. Member
  • ****
  • Thank You
  • -Receive: 0
  • Posts: 376
    • View Profile
Wheel bearing tool
« Reply #8 on: February 27, 2008, 07:01:12 PM »
Looks like the one set that keflaman posted might work for our cars.
http://www.harborfreight.com/cpi/cta...emnumber=45210

Check out the manual for the tool set:
http://www.harborfreight.com/manuals/45000-45999/45210.pdf
Logged
[SIGPIC][/SIGPIC]

1991 318is Diamantschwarz Black on Black
1992 850i Calypso Red on Black

sheepdog

  • Site Admin
  • Administrator
  • Legendary
  • *****
  • Thank You
  • -Receive: 4
  • Posts: 1272
    • View Profile
Wheel bearing tool
« Reply #9 on: February 27, 2008, 08:29:50 PM »
Quote from: keflaman;43753
It wasn't necessarily pretty and the first rear bearing took me eight hours of trial and error. The second bearing took me about three hours.


That alone worries me. Not so much the fiddling, but I have all 4 to do.
The thought of spending all weekend messing with this just seems like it is not worth it. I am not sure if that much of my time is worth saving $100

Quote from: FredK;43761
The Sir Tools B90 is heavy as heck!

Anyway, it makes bearing replacement take around an hour a side. A breeze, if you will.


Heavy is one thing, but when I can get it shipped from Ebay for half the price, a place known for outrageous shipping charges, I have to wonder. I have have heard and seen pelican be high on shipping but that is rediculous.
Logged
"When trouble arises and things look bad, there is always one individual who perceives a solution and is willing to take command. Very often, that individual is crazy." --Dave Berry

sheepdog

  • Site Admin
  • Administrator
  • Legendary
  • *****
  • Thank You
  • -Receive: 4
  • Posts: 1272
    • View Profile
Wheel bearing tool
« Reply #10 on: February 27, 2008, 08:36:30 PM »
Quote from: kowalski;43740
have you checked local stores? perhaps even the dealership?


We have Harbor Frieght and other generic tool stores. The dealer is almost an hour away and I only use them when absolutely necessary, terrible place. I would almost rather pay Pelicans outrageous shipping just to avoid them.

So tempted to do just pay someone to do it, but I don't trust anyone to do it.
Logged
"When trouble arises and things look bad, there is always one individual who perceives a solution and is willing to take command. Very often, that individual is crazy." --Dave Berry

keflaman

  • Administrator
  • Hero Member
  • *****
  • Thank You
  • -Receive: 35
  • Posts: 929
    • View Profile
Some Pictures May Help
« Reply #11 on: February 28, 2008, 11:59:13 PM »
Logged

keflaman

  • Administrator
  • Hero Member
  • *****
  • Thank You
  • -Receive: 35
  • Posts: 929
    • View Profile
More Links To Pictures
« Reply #12 on: February 29, 2008, 12:07:49 AM »
http://i221.photobucket.com/albums/dd172/keflaman/BearingPressPrep.jpg
http://i221.photobucket.com/albums/dd172/keflaman/BearingPressPrep1.jpg
http://i221.photobucket.com/albums/dd172/keflaman/BearingPressPrep2.jpg

My bearings were shot so badly the hubs were frozen in them and the bearings were frozen in the trailing arms. After using the puller to remove the hub, I used the bearing press to break the bearings out of position and get them moving.

After the bearings broke free I switched back to the three legged puller to finish removing the bearings.

HTH. Keflaman
Logged

bmwman91

  • Administrator
  • Legendary
  • *****
  • Thank You
  • -Receive: 33
  • Posts: 2798
    • View Profile
    • http://www.e30tuner.com/
Wheel bearing tool
« Reply #13 on: February 29, 2008, 10:40:15 AM »
Zoso has a good writeup on his site for the fronts.  I don't think he had any special tools to do it.

The rears...they are a bitch.  The bearing sleeves like to come off and be stuck onto the hub.  I paid a local shop $40 to swap out the old ones and put on the new ones.  Just go that route for the rears.
Logged

06/05/2011 - 212,354 miles
Visit HERE for a plethora of 318iS stuff and some other randomness.  Would you say I have a, plethora, of pinatas?

sheepdog

  • Site Admin
  • Administrator
  • Legendary
  • *****
  • Thank You
  • -Receive: 4
  • Posts: 1272
    • View Profile
Wheel bearing tool
« Reply #14 on: February 29, 2008, 12:29:31 PM »
Quote from: bmwman91;43873
Zoso has a good writeup on his site for the fronts.  I don't think he had any special tools to do it.

The rears...they are a bitch.  The bearing sleeves like to come off and be stuck onto the hub.  I paid a local shop $40 to swap out the old ones and put on the new ones.  Just go that route for the rears.

That is actually the part I am least concerned about doing.
Logged
"When trouble arises and things look bad, there is always one individual who perceives a solution and is willing to take command. Very often, that individual is crazy." --Dave Berry
Pages: [1] 2   Go Up
« previous next »