Author Topic: My waterpump hurts! (Read 2772 times)

PaulC · « **on:** January 28, 2008, 04:31:15 PM »

Tried removing the dang thing using two bolts and the threaded bores like in the Bentley and the pump cracked! Crobar does nothing. What do I do?

PaulC · « **Reply #1 on:** January 28, 2008, 04:59:41 PM »

Nevermind, the crobar w/ more penetrant worked!

hoevesruperd · « **Reply #2 on:** January 28, 2008, 05:35:53 PM »

yes!!! good job. same thing happened with mine.
get a new pump with metal impellers, i heard the plastic impellers tend to wear faster

PaulC · « **Reply #3 on:** January 28, 2008, 07:49:59 PM »

Hey, is that you in your avatar? Do you also drive a T3 Bus?

And yes, I already have a new GRAF pump and it has a metal impeller. The old one was plastic and there was quite a bit of white cavitation(sp?) inside. But I have to say, the plastic impeller looked fine and there was nothing wrong with the pump until I ruined it!

KhmerMafia781 · « **Reply #4 on:** February 27, 2008, 12:01:53 PM »

Quote from: PaulC;41841

Nevermind, the crobar w/ more penetrant worked!

where u penetrated with the crobar?? the side of the water pump or the connector where the fan clutch connect

i have the same problem and is stuck don't know where to pry it out from down want to hurt timing chain cover

KhmerMafia781 · « **Reply #5 on:** February 27, 2008, 12:03:08 PM »