Author Topic: wheels, what offest? (Read 4631 times)

Adam C. · « **on:** November 20, 2007, 05:44:15 PM »

im looking at getting some new wheels, 16x7"s. what offset should they be? whats the widest tire you can fit on all four corners?

thanks

ducatipaso · « **Reply #1 on:** November 20, 2007, 06:47:55 PM »

throwing this out there, my 15x7s are ET24

Brilliantrot · « **Reply #2 on:** November 27, 2007, 06:41:08 PM »

My 16x7.5 ACS Type I's are ET25 with 225/45's and they fit perfectly all the way around with no fender rolling. No room for a 245 in front with out rolling/flaring but would fit in the back.

D. Clay · « **Reply #3 on:** November 27, 2007, 09:35:28 PM »

17X7 with 25mm offset. 215/45X17. Tire Rack's site also lists under "Specs" the tread width of most tires. In the above size the tread width varies from 7.4" to 8.3".

belzark · « **Reply #4 on:** February 03, 2008, 01:47:57 PM »

hi! i have 16x7.5 wheels with et 20 and use 215/40 tires.

Sorry if my english is not correct but i�m from spain.

hoevesruperd · « **Reply #5 on:** February 03, 2008, 06:37:24 PM »

Quote from: belzark;42145

hi! i have 16x7.5 wheels with et 20 and use 215/40 tires.

Sorry if my english is not correct but i�m from spain.

i see you're new here, go to the member profile section and start a thread with pictures, it'd be nice to know a little more about you and your car!!

i dont want to hijack this intersting thread. i'm also considering new wheels and tires depending on the budget left after the restoration.

TheNeek · « **Reply #6 on:** February 12, 2008, 09:21:25 AM »

I have 15x7" ET13 MiM 1800's
A staggered set of Ronal Racing 3 piece mag wheels 15x8 ET-6 out back, ET 12 up front.
A broken down set of BBS RS wheels, hopefully 15x9 all the way around.

Opps, forgot to mention it's an E21. Standard fitment is ET 13 on a 7" wheel for my model.
Ronal, centers are out for powder coat, not a fan of the blue:

MiM's: In need of work:

Center caps I made for the MiM's:

I'm a wheel whore.

Eurospec · « **Reply #7 on:** February 22, 2008, 04:12:01 PM »

I hope you plan on keeping the ronals. They're closing their distribution centers here in the states. Go figure...