Author Topic: Feeler M42 Catcams GB (Read 15642 times)

flyingbrickperformance · « **Reply #15 on:** November 19, 2007, 07:57:18 AM »

I have one pretty definite participant, myself, and would like to find at least 2 others to pitch in to make this feasible. 5 orders of cams with springs will probably fill a shipment, which would help subsidize some of the shipping from Belgium so if you're definitely able to participate in this, let me know.

flyingbrickperformance · « **Reply #16 on:** November 20, 2007, 08:03:26 AM »

I now have 3 participants - need 2 more to make an initial order, after which I'd need an additional 5 people. Anyone?

flyingbrickperformance · « **Reply #17 on:** December 07, 2007, 06:06:01 PM »

If anyone wants in on this, please email me at groupbuy@flyingbrickperformance.com. I'm going to consolidate some of the final discussions with people via central email to eliminate problems or slow responses.

twism · « **Reply #18 on:** December 08, 2007, 09:39:24 PM »

Would you please tell me why I should buy a valve from you when it is the same price on flyingbrickperformance website? And also if you're working for them I would like to let you know that I'm very dissapointed with my last purchase from the website, I ordered SS brake lines on 27th of November, and I saw that the money were taken on 27th but the SS kit wasn't shipped until 5th of December!

beegeezy · « **Reply #19 on:** January 15, 2008, 08:00:57 PM »

Are the 269 cams available for this? It says on the site that that is the largest hydro cams they offer. Would I need new springs to run it?

beegeezy · « **Reply #20 on:** January 15, 2008, 08:01:35 PM »

nvm, it says on the description oem equipment will work. How much for the set?

flyingbrickperformance · « **Reply #21 on:** January 17, 2008, 08:05:11 PM »

Quote from: beegeezy;41272

nvm, it says on the description oem equipment will work. How much for the set?

The price for the set is listed in an earlier response.

This is moving pretty slow - having a hard time getting more than a couple people who are serious.

redhead · « **Reply #22 on:** January 18, 2008, 11:25:10 AM »

If you could include an m20 cam in there w/springs pm me and let me know.

Nick_318is · « **Reply #23 on:** January 18, 2008, 01:18:24 PM »

any idea on gains?

xsjado · « **Reply #24 on:** August 02, 2010, 09:58:05 AM »

would love to know if the gains are worth it,269degrees and revving past 7k,would i need valve springs and solid lifters too?

Author Topic: Feeler M42 Catcams GB (Read 15642 times)

twism